User manual SAMSUNG MWR-TH00

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG MWR-TH00. We hope that this SAMSUNG MWR-TH00 user guide will be useful to you.


SAMSUNG MWR-TH00 : Download the complete user guide (740 Ko)

You may also download the following manuals related to this product:

   SAMSUNG MWR-TH00 (741 ko)
   SAMSUNG MWR-TH00 (740 ko)
   SAMSUNG MWR-TH00 (740 ko)

Manual abstract: user guide SAMSUNG MWR-TH00

Detailed instructions for use are in the User's Guide.

[. . . ] x When moving, consult authorized service personnel for disconnection and installation of the remote controller. x Ensure that the wall is strong enough to support the weight of the remote controller. x In the event of a malfunction (burning smell, etc. ), immediately stop operation, turn off the electrical breaker, and consult authorized service personnel. [. . . ] Note x You can change modes at any time. E-6 3 To adjust the temperature, press the buttons one or more times until the required temperature is displayed. Result: x Each time you press buttons: - The temperature is adjusted by 1C. x The air conditioner starts cooling, provided that the room temperature is than the selected temperature. - The quantity of air is adjusted automatically. E-7 ENGLISH Cooling Your Room You must select the COOL mode if you wish to adjust the : x Cooling temperature x Fan speed when cooling 1 If necessary, press (ON/OFF) button. Result: : x The On/Off indicator on the wired remote controller comes on. x The air conditioner runs in the mode selected when the unit was last used. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: x Plugged in x Stopped lt will start up normally after three minutes. 2 To select the COOL mode, press the button until is displayed at the top of the wired remote controller. Note x You can change modes at any time. E-8 3 To adjust the temperature, press the buttons one or more times until the required temperature is displayed. Result: x Each time you press buttons: - The temperature is adjusted by 1C. x The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature ; the fan will, however, operate. 4 Select the fan speed by pressing the button one or more times until the intended value is displayed : Automatic(rotated : Low Medium High ) 5 To control the direction of the air flow, refer to page 15. E-9 ENGLISH Heating Your Room (Except cooling only models) You can select the HEAT mode only in heat pump models. You must select the HEAT mode if you wish to adjust the : x Heating temperature x Fan speed when heating 1 If necessary, press (ON/OFF) button. Result: : x The On/Off indicator on the wired remote controller comes on. x The air conditioner runs in the mode selected when the unit was last used. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: x Plugged in x Stopped lt will start up normally after three minutes. 2 To select the HEAT mode, press the button until is displayed at the top of the wired remote controller. Note x You can change modes at any time. E-10 3 To adjust the temperature, press the buttons one or more times until the required temperature is displayed. Result: x Each time you press buttons: - The temperature is adjusted by 1C. x The air conditioner starts heating, provided that the room temperature is lower than the selected temperature ; the fan will, however, operate. 4 Select the fan speed by pressing the button one or more times until the intended value is displayed : Automatic(rotated : Low Medium High ) 5 To control the direction of the air flow, refer to page 15. E-11 ENGLISH Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. 1 If necessary, press (ON/OFF) button. Result: : x The On/Off indicator on the wired remote controller comes on. x The air conditioner runs in the mode selected when the unit was last used. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: x Plugged in x Stopped It will start up normally after three minutes. 2 To select the DRY mode, press the button until is displayed at the top of the wired remote controller. Note x You can change modes at any time. E-12 3 To adjust the temperature, press the buttons one or more times until the required temperature is displayed. Result: : x Each time you press buttons: - The temperature is adjusted by 1C. [. . . ] x You can see or change the setting mode and/or the temperature by pressing the button or the buttons after setting the On timer. Note E-16 To Cancel the On Timer 1 Press the Note button. x If you want to turn on the air conditioner before the timer reaches the setting time, press the button. E-17 ENGLISH Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given period of time. You can select the Off Timer only when the air conditioner is on. 1 To set the operating time, press the button one or more times until the required time is displayed. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG MWR-TH00




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG MWR-TH00 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.