User manual SAMSUNG CW-29Z068P OPEN SOURCE GUIDE (VER.1.1)

[. . . ] Switching Your Television On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Placing Your Television in Standby Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Becoming Familiar with the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Plug & Play Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] C (Real channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode. S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. English - 16 Skipping Unwanted Channels You can exclude the channels you have chosen from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All of the channels that you do not specifically choose to skip are displayed during scanning. TV Auto Store Manual Store Add/Delete Sort Name More Move Enter Channel 1 Press the MENU ( Result: ) button. Return The main menu is displayed. 2 Press the or button to select Channel. ) button. TV P P P P 1 2 3 4 oe : : : Add/Delete Added Added Added Added 3 4 5 Press the ENTER ( Press the or button to select Add/Delete. Press the ENTER ( Result: ) button. Move oe Adjust Return The stored channels are displayed. TV P P P P 1 2 3 4 oe : : : Add/Delete Deleted Added Added Added 6 Press the or button to select the channel to add or erase. Repeat Step 6 for each channel to be added or erased. 7 Move oe Adjust Return English - 17 Assigning Names to Channels Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. TV Auto Store Manual Store Add/Delete Sort Name More Move Enter Channel 1 Press the MENU ( Result: ) button. The main menu is displayed. 2 Return Press the or button to select Channel. ) button. TV P P P P 1 2 3 4 oe : : : ----------------- Name 3 4 5 Press the ENTER ( Press the or button to select Name. Press the ENTER ( Result: ) button. The current channels are displayed. Move oe Adjust Return 6 7 If necessary, select the channel to be assigned to a new name by pressing the or button. Press the or button to select a letter (A~Z), a number (0~9) or a symbol (-, space). The reset function is set for each mode (Dynamic, Standard, Movie, or Custom). Result: The previously adjusted settings will be reset to the factory defaults. Move oe Adjust Return TV . . . More Colour Tone : Reset Mode Normal The television has an "automatic degaussing" system that is activated if magnetic interference is present. To degauss the television screen, switch power off by pressing the " " (On/Off) button on the front panel. (Refer to "Automatic Degaussing to Remove Colour Patches" on page 45. ) Move oe Adjust Return English - 22 Selecting the Picture Size (depending on the model) You can select the picture size which best corresponds to your viewing requirements simply by pressing the "P. SIZE ( )" button. Depending on the model, the following picture sizes are available: Normal, Zoom1, Zoom2, 16:9 16:9, Panorama, Zoom1, Zoom2, 4:3, Auto Wide TV Mode Size Digital NR Tilt : oe Picture Dynamic 16:9 : On :0 1 Lifting is available in the Zoom1 or Zoom2 mode by pressing the or button. Move oe Adjust Return Press the MENU ( Result: ) button. The main menu is displayed. 2 Press the or button to select Picture. ) button. 3 4 5 Press the ENTER ( Press the or button to select Size. Press the oe or button to select the picture size. English - 23 Selecting the Digital NR If the signal received by your television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen. TV Mode Size Digital NR Tilt Picture : Dynamic : 16:9 oe On :0 1 Press the MENU ( Result: ) button. The main menu is displayed. 2 Move oe Adjust Press the or button to select Picture. ) button. Return 3 4 5 Press the ENTER ( Press the or button to select Digital NR. To activate this feature, select On by pressing the oe or button. English - 24 Using the Tilt Control Feature If you find that the picture received is slightly tilted to one side, you can adjust the tilt setting. TV Depending on the model Picture Mode Size Digital NR Tilt : : Dynamic 16:9 : On oe0 1 Press the MENU ( Result: ) button. The main menu is displayed. 2 Press the or button to select Picture. ) button. Move oe Adjust Return 3 4 5 Press the ENTER ( Press the or button to select Tilt. [. . . ] Teletext information is often divided between several pages displayed in sequence, which can be accessed by: Entering the page number Selecting a title in a list Selecting a coloured heading (FASTEXT system) Displaying the Teletext Information You can display Teletext information at any time on your television. to For Teletext informationbe be displayed correctly, channel reception must stable; otherwise: Information may be missing Some pages may not be displayed 1 2 Select the channel providing the Teletext service using the button. or Press the TTX/MIX ( ) button to activate the teletext mode. It can be redisplayed Result: at any time by pressing the (index) button. If you wish to display the actual broadcast at the same time as the teletext page, press the TTX/MIX ( ) button again. [. . . ]