User manual SAMSUNG BN68-02849B

[. . . ] Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. To receive more complete service, please register your product at Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not included in this specification. [. . . ] If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process. howtosetupautomatically To set up the wireless connection automatically , follow these steps: 1. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)" (p. You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem. To enter the Pass Phrase, follow these general directions: ­ Press the number buttons on your remote to enter numbers. ­ Use the direction buttons on your remote to move from button to button on the SecurityKey screen. ­ To a enter letter or symbol, move to the letter or symbol, and then press the ENTERE button. ­ To delete the last letter or number you entered, press the Green button on your remote. Wait until the connection confirmation message is displayed, and then press the ENTERE button. If the AP is set to Hidden (Invisible), you have to select AddNetwork and enter the correct NetworkName(SSID) and SecurityKey to establish the connection. You can connect to a mobile device without an access point through the "Samsung Wireless LAN Adapter" by using a peer to peer network. If the other methods do not work, you need to enter the Network setting values manually. GettingtheNetworkConnectionValues To get the Network connection values on most Windows computers, follow these steps: 1. Howtosetupmanually To enter the Network connection values manually, follow these steps: 1. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)" (p. When done with each field, use the button to move successively to the next field. This function is available when SWL(Samsung Follow Steps 1 through 6 in the "How to set up using PBC (WPS)" (p. Input the generated NetworkName(SSID) and SecurityKey into the device you want to connect. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)" (p. This function lets you connect a Samsung device that supports the PBC (WPS) to your TV. You can connect devices to the TV even if a sharer is not connected to the TV. IfYourTVFailstoConnecttotheInternet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. [. . . ] This function is only available with digital channels from an Antenna / RF/Coax connection. It is necessary to use magnetized screw driver if you cannot remove the screws from the TV. If the TV is in the StoreDemo mode, it will reset audio and picture settings every 30 minutes. Loss of audio or video can be caused by using overly rigid or thick cables. [. . . ]