User manual SAGEM MY421Z

[. . . ] 287244723_my421Z_EN. book Page 1 Monday, October 6, 2008 4:15 PM ENGLISH 287244723_my421Z_EN. book Page 2 Monday, October 6, 2008 4:15 PM 287244723_my421Z_EN. book Page 3 Monday, October 6, 2008 4:15 PM You have just purchased a SAGEM phone, we congratulate you; it is recommended that you read this handbook carefully in order to use your phone efficiently and in the best conditions. Your phone can be used internationally in the various networks (GSM 900 MHz and DCS 1800 MHz or PCS 1900 MHz) depending on the roaming arrangements with your operator. WARNING Depending on the model, network configuration and associated subscription cards, certain functions may not be available. SAGEM is a trademark of Sagem Mobiles, SAFRAN group. JavaTM and all JavaTM based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. [. . . ] You do not need to select a device from this list at this time, you can start a one-off search for a device when you initiate sending. If the Bluetooth® function is not active, the phone prompts you to activate it using one of the 3 modes described above. The phone searches for visible Bluetooth® devices and displays the list. Your phone then prompts you to enter a code which must be the same as the code entered on the remote device. Enter and validate this code: Your phone is now paired with the remote device. [Options] on the name of a device lets you access the following options: - Delete: This is used to delete the device. Settings 47 287244723_my421Z_EN. book Page 48 Monday, October 6, 2008 4:15 PM - Delete all: This is used to delete all your devices. - Deactivate: This is used to deactivate the connection with the device. - Properties: This is used to display the list of the device's Bluetooth® services. Notes: - Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing this operation. - The code of the remote device may be predefined by the device manufacturer. In this case, refer to the user manual of this device to find out this code. Bluetooth® name - This is the name used to identify your phone when it is detected by another Bluetooth® device. USB Mode This menu allows you to select a mode to connect the phone to a PC with a USB cable available as an accessory. At Plugging-in If you select this option, when connecting a USB cable, the phone asks you to select the mode you want. It allows you to exchange data (visit cards, contacts) between the phone and a PC. After connection of the USB cable between the phone and the PC, you must use the MPAS software (My Pictures And Sounds available on www. planetsagem. com) or the Wellphone software (available on www. wellphone. com). PictBridge This mode allows you to connect the phone to a printer (printing photos) without using a PC. 48 Settings 287244723_my421Z_EN. book Page 49 Monday, October 6, 2008 4:15 PM USB key This mode allows you to exchange data between a PC and the phone memory (the one containing the pictures, sounds and videos files) or the memory card. After connection of the USB cable between the phone and the PC, the phone memory and the memory card are displayed as additional memories in the Windows explorer files directory. Note: If a call comes in during an exchange of data with your PC, the link will be interrupted and will have to be manually re-started. Notes when the phone is connected to a personal computer in USB key mode: - The memory card is not detected by the phone. Consequently, if you have configured your phone with a wallpaper or a ring tone stored in the memory card, these will not be used during the connections. [. . . ] SIM BLOCKED If a wrong PIN is entered three times in succession, your SIM card is blocked. You must then: - Enter the PUK (Personal Unblocking Key) code provided by your operator, and validate. After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is permanently locked. SIM LOCKED In certain cases, the handset can only be used with some types of SIM cards. [. . . ]