User manual SAGEM D70T

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAGEM D70T. We hope that this SAGEM D70T user guide will be useful to you.


SAGEM D70T : Download the complete user guide (4861 Ko)

You may also download the following manuals related to this product:

   SAGEM D70T (4929 ko)
   SAGEM D70T (4628 ko)
   SAGEM D70T (5145 ko)
   SAGEM D70T (9779 ko)
   SAGEM D70T (9779 ko)
   SAGEM D70T (5857 ko)
   SAGEM D70T DATASHEET (577 ko)
   SAGEM D70T DATASHEET (117 ko)
   SAGEM D70T DATASHEET (1722 ko)

Manual abstract: user guide SAGEM D70T

Detailed instructions for use are in the User's Guide.

[. . . ] mars 2004 1:57 13 INTRODUCTION Dear customer: Thank you for purchasing a SAGEM DECT telephone; we appreciate your trust in us. This product was manufactured with the utmost care, should you encounter any difficulties during its use, we recommend that you refer to this user guide. You can also find information on the following site: http://www. sagem. com/faq For your comfort and safety, we ask that you read the following paragraph carefully: Recommendations and safety instructions Your DECT telephone must not be installed in a humid room (wash room, bathroom, laundry room, kitchen, etc. ) unless it is 1. 50 m away from a water point, or outside. Your telephone must be operated at temperatures ranging from 5°C to 45°C. [. . . ] · To transfer a single number, take the sender handset and proceed as follows: - Select the number to be transferred using or . Once it is done, a screen indicating the end of the transfer will appear. 03/150 Candy OK Smith Harris Transfer Return 47 Livre du MD+. book Page 48 Mercredi, 31. mars 2004 1:57 13 INTERCOMMUNICATION · 03/150 Candy OK If you have elected to transfer numerous numbers, take the sender handset and proceed as follows: - Select one of the numbers to be transferred in the phonebook using or . Once it is done, you are taken back to the list of numbers in the phonebook. - Select the next number to be transferred using or and press Transfer . Press Return R Smith Harris Transfer Return to exit. Monitoring a room You can use your handset to monitor a room. The other handset will remain with you, it is in "receiver" mode. On the receiver handset: On the navigator key , press or until the Internal call screen is displayed, press OK to confirm. Internal call Transm. PhBk OK Room monitor Internal call Return Confirm Select Room monitor using or . Press Confirm . Room monitor OK Handset 2 Handset 3 Return Call Select the sender handset using or . . The sender handset rings, pick up using the green key 48 Livre du MD+. book Page 49 Mercredi, 31. mars 2004 1:57 13 INTERCOMMUNICATION On the receiver handset: A screen invites you to activate the monitor mode (sender mode). The handset in sender mode does not ring to notify you of incoming calls. At the end of the call, the handset will automatically return in monitor mode. - Press Stop Stop R R Monitor mode -Sender Stop Monitor mode -ReceiverStop Call on the receiver set and confirm by pressing Yes and on the transmitter handset at the same time. 49 Livre du MD+. book Page 50 Mercredi, 31. mars 2004 1:57 13 SECURITY SECURITY This menu enables you to change or customise the security parameters of your telephone. You can: · lock the keypad, · programme an emergency number, · modify the base code, · define the call time limit, · define forbidden prefixes, · authorise or deny communication to a number of handsets, · hide your telephone number. Security Return Confirm Locking/unlocking the keypad To lock/unlock the keypad, press and hold the keypad key some time. On the navigator key , press Confirm or until the Security for screen is displayed, press OK to confirm. Security Confidential OK Keypad lock Emergency Return Confirm Select Keypad lock using Press Confirm or . to lock the keypad. A screen indicates that the keypad is locked. Keypad locked Long press on * for unlock Programming an emergency number This function allows you to define an emergency number which can be enabled or disabled. Once it is activated, the emergency number will be automatically dialled when the green key · is pressed from the idle screen. Once activated, you can however call a different number with predialling by dialling a number and pressing 50 Livre du MD+. book Page 51 Mercredi, 31. mars 2004 1:57 13 SECURITY The following types of numbers should not be programmed: Fire, emergency and police rescue services. . . On the navigator key , press or until the Security screen is displayed, press OK to confirm. Security Keypad lock OK Emergency Change Code Return Confirm Select Emergency using or . Press Confirm . Emergency Phone No: Off Edit Confirm An information screen displays the current stored emergency number and indicates whether it is enabled or disabled. . To keep the setting, press Confirm Emergency Activate OK Enter number Deactivate Return Confirm A list offers you to either change the status (on/off) or modify the emergency number. Emergency Emergency no. [. . . ] avril 2004 10:06 10 WARRANTY 1) Defects breakdown or malfunctions due to: · failure to properly follow the installation process, the operating manual and/or the instructions for use; or · an external cause to the Equipment (including but not limited to, shock, lightening, fire, vandalism, malevolent action, contacts with various liquids or vermin or water damage of any nature, inappropriate electric voltage); or · modifications to the Equipment made without the written approval of SAGEM; or · a lack of every day maintenance (as described in the documentation supplied with the Equipment) or to a lack of supervision or care; or · bad storage or environmental conditions, particularly those related to temperature and hygrometry, effects of variations of electric voltage, parasites from the electric network or from the earth; or · repair, work (opening or attempt to open the Equipment), alteration, tampering or maintenance of the Equipment by persons not authorised by SAGEM. 2) Damage due to insufficient or bad packaging of Equipment when returned to the Authorised Repair Centre. 3) Wear and tear from normal daily use of the Equipment and its accessories. 4) Communication problems related to an unsuitable environment, including in particular: · problems related to access to the telephone network such as interruptions by access networks or malfunction of the line used by the subscriber or his correspondent, poor line telephone quality, · transmission faults (for example, poor geographical coverage by radio transmitter line quality, or any interference between the environment and the radio transmitter), · modifications of parameters of telephone network carried out after the sale of the Equipment. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAGEM D70T




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAGEM D70T will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.