User manual RYOBI PD1930I SCHEMA ELECTRIC
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RYOBI PD1930I. We hope that this RYOBI PD1930I user guide will be useful to you.
Manual abstract: user guide RYOBI PD1930ISCHEMA ELECTRIC
Detailed instructions for use are in the User's Guide.
[. . . ] ß Immediately call your gas supplier from a neighbor's phone. ß If you cannot reach your gas supplier, call the fire department. Installation and service must be performed by a qualified installer, service agency or the gas supplier. (In Massachusetts a licensed plumber / gas fitter. ) Note to the installer: Please leave this instruction book with the consumer for the local electrical / gas inspector's use.
2
Contents
IMPORTANT SAFETY INSTRUCTIONS . [. . . ] + Low flame: outer burner is turned off, inner burner is at the highest setting. / Lowest flame: outer burner is turned off, inner burner is at the lowest setting.
11
Using the cooktop
Turning on ^ To light a burner press down and turn the corresponding control knob counterclockwise to the largest flame symbol and release the knob. The Fast-IgnitionSystem will click a few seconds after the flame is lit to ensure the safety system is activated. If the burner does not light at the second attempt, turn the control knob to "ß" and see "Frequently asked questions". This stops the flow of gas and turns off the cooktop.
The knob must only be turned left to turn the appliance on and right to turn it off.
If the knob is turned: - on without pressing it down first, - clockwise past the 12 o'clock position, or - counterclockwise past the smallest flame symbol, parts of the cooktop may be damaged. The manufacturer cannot be held responsible for these damages.
12
Using the cooktop
Regulating the wok burner The inner and outer burners are both controlled by one control knob. There is a stop at the 6 o'clock position that requires you to press the knob down while turning it in order to get from the high flame to the low flame zone. ^ To reduce the flames from a high to low setting, turn the control knob counterclockwise until you feel resistance. This safety feature is not operated by electricity, it will be active even if the appliance is in use during a power failure.
Using the cooktop during a power failure
If there is an interruption to the electrical supply the gas can be ignited using a match. ^ Press down and turn the desired control knob counterclockwise to the largest flame symbol. ^ While holding down the knob, light the gas at the burner with a match. Reassemble the burners as shown in "Cleaning and Care - Burners". See "Cleaning and Care".
The flame appears different than usual. Reassemble the burners as shown in "Cleaning and Care - Burners".
19
Technical Service
In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting Technical Service please quote the serial number and model of the cooktop. This information is visible on the silver data plate supplied with the cooktop.
MieleCare
MieleCare, our Extended Service Contract program; gives you the assurance of knowing that your appliance investment is covered by 5 years of worry free ownership. MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. Only genuine Miele parts installed by factory trained professionals can guarantee the safety, reliability and longevity of your Miele appliance. Please note that unless expressly approved in writing by the Miele Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home. To learn more about MieleCare Extended Service Contracts, please contact your appliance dealer or visit us online at: www. store. miele. com
Adhere the data plate sticker to the box below:
20
Installation Instructions
To prevent accidents and machine damage read these instructions before installation or use.
21
IMPORTANT SAFETY INSTRUCTIONS
Installation The minimum distances given in these Installation instructions are to combustible surfaces, and must be observed to ensure safe operation. The cabinetry and venting hood should be installed first to prevent damage to the cooktop. [. . . ] The manufacturer cannot be held responsible for damages caused by the lack, or inadequacy, of an effective grounding system. Note to the installer Please leave these instructions with the consumer or the appliance.
28
Electrical connection
Wiring diagram
, Caution: Label all wires prior to disconnection when servicing controls. Verify proper operation after servicing.
29
Gas connection
Installation and service must be performed by a qualified installer, service agency or gas supplier. This appliance must be installed with its own shut off valve and the included gas pressure regulator. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE RYOBI PD1930I
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RYOBI PD1930I will begin.