User manual PURE EVOKE D2 MAPLE

[. . . ] Do not use or charge a ChargePAK that appears to be leaking, discoloured, rusty, deformed; emitting an odour; or is  otherwise abnormal.  o not touch a leaking ChargePAK directly; wear protective material to remove and dispose of it properly immediately. Dispose of ChargePAK as per normal rechargeable batteries according to the local laws and regulations of your region.  Some batteries may be recycled, and may be accepted for disposal at your local recycling centre. [. . . ] The sleep timer icon will appear on the display to show that the sleep timer is set. Sleep timer 30 minutes PM R PM BC Radio 2 2 BBC Radio the latest he latestnews news DR 10 Options and settings General settings Changing the language 1. Turn and press the Select dial to select a menu language from ‘English’, ‘French’, ‘German’, ‘Italian’ or ’Spanish’. EN Factory reset Resetting your Evoke removes all presets, stored stations, alarms and resets all other options to default settings. Turn and press the Select dial to confirm that you want to reset the Evoke to default settings. Com) for more information on how to update Evoke to the latest software version. 11 Digital radio settings Autotune You can use the autotune function to automatically scan for new digital radio stations and remove inactive ones. Note: Autotune is only available when you have selected ‘Digital’ as the radio source. When the autotune has finished, Evoke will tune to the last station that you were listening to. FM settings FM stereo option You can choose between ‘Stereo’ or ‘Mono’ reception when listening to FM radio. Note: The FM stereo option is only available when you have selected ‘FM’ as the radio source. Turn and press the Select dial to choose between ‘Stereo’ or ‘Mono’ FM reception. FM tuning mode Press Menu and turn and press the Select dial to choose ‘FM Tuning Mode’. Choose from the following two modes: When you turn the Select dial, the radio tunes to the next station with a good signal. Seek: Manual: When you turn the Select dial, the radio tunes up or down the FM radio frequency range by 0. Turn and press the Select dial to choose ‘Bass’ or ‘Treble’. Turn and press the Select dial to set the level from -6 (low) to 6 (high). 12 EN Display settings Changing the backlight brightness level 1. Press Menu and turn and press the Select dial to choose ‘Display’. Turn and press the Select dial to adjust the brightness level when Evoke’s display is ‘Active‘ or in ‘Standby’. Turn and press the Select dial to set a brightness level between ‘1’ (dim) and ‘5’ (bright). Press Menu and turn and press the Select dial to choose ‘Display’. [. . . ] Drej knappen Select til højre eller venstre for at rulle gennem listen med forudindstillinger, og tryk på knappen Select for at stille ind på den valgte forudindstillede station.  Drej og tryk på knappen Select for at indstille timetallet for alarmen.  Drej på knappen Select, og tryk for at angive en af følgende indstillinger for alarmgentagelse: "Once" (en gang), "Daily" (dagligt), "Weekdays" (ugedage), "Weekends" (weekender), "Every Saturday" (hver lørdag) eller "Every Sunday" (hver søndag), og tryk på Select for at bekræfte.  Drej og tryk på knappen Select for at indstille lydstyrken for den radiostation, der skal spille, når alarmen lyder. [. . . ]