User manual PHILIPS SA2SONGBRD

[. . . ] Do not expose headphone socket or battery compartment to water, as water entering the set may cause major damage. Ensure that you retain the original files you have downloaded to your device. Philips is not responsible for any loss of data if the product becomes damaged or not readable / legible. Manage (transfer, delete, etc. ) your music files only with the supplied music software to avoid problems. [. . . ] Install Philips Songbird on your computer (see chapter Install software) and follow the instructions to update (see chapter Manually verify / update the firmware). Note · Your music files are not affected by a firmware update. Manually verify / update the firmware 1 2 3 4 5 6 Ensure that your computer is connected to the Internet. Connect SPARK to the computer (see section Connect and charge for instructions). On your computer, click Start > Programs > Philips > Philips Songbird to launch the Philips Songbird application. Select Tools > Updates » Philips Songbird checks for updates and installs new firmware from the Internet, if available. Wait until the update is completed, then disconnect SPARK from the computer. » SPARK restarts after the firmware is updated and is ready for use again. 10 EN 5 Turn SPARK on and off 1 To toggle between modes on and off, slide and hold for approximately 2 seconds. Automatic shut-down SPARK has an automatic shut-down feature that can save battery power. After 10 minutes in idle mode (no music plays, no button is pressed), SPARK turns off. 1 Slide and hold for approximately 2 seconds to turn SPARK on again. Lock the keys SPARK has a lock switch to prevent accidental operation. 1 2 To lock the buttons when you play, move the slider to position . » All buttons except the volume keys are locked and the display shows a lock icon. To unlock the buttons again, move the slider to the center position. EN 11 English 6 Philips Songbird SPARK comes with the Philips Songbird software. The Philips Songbird software helps you to: · purchase new media (music and videos) online · create a media library · manage your media library · play music and videos · sync your media with the SPARK When Philips Songbird is launched for the first time, choose from the following options to import media files into the Songbird media library: · Import an existing iTunes library. (You can select to watch a folder, so that the files that are added or deleted there are automatically added or deleted in the Songbird media library. ) Import media files from a directory The following steps show how you can import media (music and video) files that are stored elsewhere on your computer or computer network: 1 2 3 On the computer, launch the Songbird program. · Click the + symbol at the bottom of the left hand side Service Pane. Enter a name for the new playlist. You can change the design and color scheme of the Songbird library. Find new feathers 1 2 On the computer, launch the Songbird program. On the Songbird toolbar, select View > Feathers > Get More Feathers. . . . » Follow the on-line instructions to install the new feathers. 3 1 2 3 Add titles to a playlist On the computer, launch the Songbird program. Choose from these options to add the selected titles to a playlist: · Drag and drop the selected titles to the playlist in the Service Pane. · Right-click on the selection, and then select Add to Playlist > The_name_ of_your_playlist. » -All selected titles are added to the playlist. Format SPARK (erase all music and data) Philips Songbird has a Format feature that you can use to format SPARK and erase all your files from the internal memory. Caution · The following procedure erases all your files that are stored on SPARK. Remove titles from a playlist 1 2 3 1 2 3 4 5 On the computer, launch the Songbird program. » The selected title is removed from the playlist. Install Philips Songbird on your computer (see chapter Install software), and then launch the program. Follow the on-screen instructions to complete the repair procedure. EN 15 English 1 Change the look of the Songbird library Repair SPARK (restore factory settings) Philips Songbird has a repair feature that you can use to restore SPARK to the factory settings. Before you proceed, back up your files that are stored on SPARK if possible. Caution · The following procedure erases all your files that are stored on SPARK, and restores the factory settings. 1 2 3 Install Philips Songbird on your computer (see chapter Install software), and then launch the program. [. . . ] to exit the menu. Press and hold · Fore more options on settings, see section Customize settings . In the menu, the following options are available: Theme · · · Screensaver · · · · · · Startup · screen · Shutdown · screen · Black Silver Gold (none) Display off (default) Personal slideshow. . . Default Select picture. . . EN 23 English 13 Settings This is how you customize SPARK: From the main menu, select to enter the settings mode. In the menu, navigate as follows: 1 2 3 4 Press / to select an option. Press to confirm a selection and go to the next level (when available). to exit the menu. Press and hold · Fore more options on display settings, see section Personalize . In the menu, the following options are available: Settings Play mode Options menu Play music from. . . [. . . ]