User manual PHILIPS ORD2105C

[. . . ] Cleaning and user maintenance shall not be made by children without supervision. • Before you connect the appliance, ensure that the voltage indicated • Do not use the appliance for any other purpose than described in • When the appliance is connected to the power, never leave it • Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. on the appliance corresponds to the local power voltage. • Pay full attention when using the appliance since it could be extremely hot. Only hold the handle as other parts are hot and avoid contact with the skin. [. . . ] • Always place the appliance with the stand on a heat-resistant, stable flat surface. The hot heating plates/barrel should never touch the surface or other flammable material. • Avoid the mains cord from coming into contact with the hot parts of the appliance. • Keep the appliance away from flammable objects and material when it is switched on. • Keep the heating plates/barrel clean and free of dust and styling products such as mousse, spray and gel. • If the appliance is used on color-treated hair, the heating plates/barrel may be stained. • Always return the appliance to a service centre authorized by Philips for examination or repair. Repair by unqualified people could result in an extremely hazardous situation for the user. • Do not insert metal objects into openings to avoid electric shock. Electromagnetic fields (EMF) This appliance complies with all standards regarding electromagnetic fields (EMF). 6 To style the rest of your hair, repeat steps 2 to 5. Create waves (Fig. 5) 1 Select the small curling attachment ( brush ( ) onto barrel. Then unwind the section of hair to remove the Slide-on brush ( ) from your hair. Create crimps (Fig. 6) 1 Select crimping/straightening attachment ( ). Make sure that the curved surfaces ( ) are facing each other. • To remove the the crimping/straightening plates, grab each protruded side of the plate ( ) and pull it off. 2 Press the lever ( ) to open the attachment and place a section of hair between the crimping plates. 3 Release the lever and keep the plates together for 5 to 10 seconds. 4 Press the lever to open the plates and place the next section of hair between the plates. Create straight sleek style and flicks (Fig. 7) 1 Make sure that the flat surfaces ( ) are facing each other. Press the lever ( ) to open the attachment and place a section of hair between the straightening plates. [. . . ] Create straight sleek style and flicks (Fig. 7) 1 Make sure that the flat surfaces ( ) are facing each other. Press the lever ( ) to open the attachment and place a section of hair between the straightening plates. 2 Slide down slowly the length of the hair in a single motion from root to end, without stopping to prevent overheating. [. . . ]