Detailed instructions for use are in the User's Guide.
[. . . ] Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug
4 EN
Notice
Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user's authority to operate the equipment. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. [. . . ] · Insert the red/blue wires to "+", black wires to "-". Insert 2 UM-4 AAA batteries with correct polarity (+/-) as indicated.
3
EN
11
3
Close the battery compartment.
Switch to standby
1
Press to switch the apparatus to standby mode. » The clock (if set) appears on the display panel.
To switch the apparatus to Eco Power Standby mode:
1 Set clock 1 In standby mode, press and hold CLOCK
on the main unit to activate the clock setting mode. Then the hour digits are displayed and begin to blink.
Note · In Eco Power Standby mode, press CLOCK to show
clock first, then press and hold CLOCK to proceed clock setting.
In standby mode, press and hold for more than 2 seconds. » The backlight on the display panel turns off.
Note
· If no button is pressed over 15 minutes in Standby
mode, the unit goes to Eco Power Standby mode automatically and the backlight on the display turns off.
2 3 4 5 6
Press on the main unit repeatedly to select 12 hour or 24 hour format. Press CLOCK to confirm.
Turn on 1 Press STANDBY-ON on the main unit.
» The apparatus switches to the last selected source.
12
EN
4 Play
Play disc 1 Press CD to select the disc source. 3 Insert a disc with the printed side facing
up, then close the disc tray. Release to resume normal play.
3
Press USB/MP3 LINK to select the USB source. To review the program, in the stop position, press and hold PROG for more than 2 seconds.
14
EN
Note · You can program a maximum of 20 FM radio stations
and 10 MW radio stations.
Tune to a radio station
Note · For optimal reception, fully extend and adjust the
position of the FM antenna.
1 2 3
Tune to a radio station. Press to allocate a number (1 to 20) to this radio station, then press PROG to confirm. » The preset number and the frequency of the preset station are displayed. Repeat the above steps to program other stations.
Note
·
1 2
Press TUNER to select the tuner source. » The radio tunes to a station with strong reception automatically.
4
3
Repeat step 2 to tune to more stations. · To tune to a weak station, press / repeatedly until you find optimal reception.
· To overwrite a programmed station, store another
station in its place.
Program radio stations automatically
Note · You can program a maximum of 20 FM radio stations
and 10 MW radio stations.
Select a preset radio station 1 In tuner mode, press to select a
preset number.
1
In tuner mode, press and hold PROG for 2 seconds to activate automatic program mode. » All available stations are programmed in the order of waveband reception strength. » The first programmed radio station is broadcast automatically.
EN
15
English
6 Listen to the radio
Program radio stations manually
7 Adjust sound
Adjust volume level 1 During play, press VOL +/- to increase/
decrease the volume level.
Select a preset sound effect 1 During play, press DSC repeatedly to
select: · [POP] (pop) · [JAZZ] (jazz) · [CLASSIC] (classic) · [ROCK] (rock)
Enhance bass 1 During play, press DBB to turn on or off
dynamic bass enhancement. » If DBB is activated, DBB is displayed.
Mute sound 1 During play, press
sound.
to mute/unmute
16
EN
8 Record
Note · To record, use only "Normal" (IEC type I) tapes
on which the write-protect notches (tabs) are not broken.
· ·
Tip · When you play or record a tape, the sound source
cannot be changed.
· The best recording level is set automatically.
Change of volume and sound effect does not affect recording.
Record from radio to tape 1 Tune to the desired radio station. 5 Press to start recording.
· · To pause recording, press . To stop recording, press .
Note · The quality of recorded sound can differ depending
on the source and the tape used.
Record from USB 1 Press USB/MP3 LINK repeatedly to
select USB source.
Record from CD to tape 1 Press CD to select disc source. · To stop recording, press
.
» Disc play starts automatically from the beginning of the disc. · To stop recording, press .
Record a section of a disc to tape 1 During disc play, press and hold / to
search, then release the button. · To select a track, press / .
Record from external audio devices 1 Press USB/MP3 LINK repeatedly to
select external audio source.
2 3
Press
to pause disc play.
2 3 4 5 6
Connect an external audio device. [. . . ] · As a power-saving feature, the unit switches off automatically 15 minutes after track play reaches the end and no control is operated. · Apply a piece of adhesive tape over the missing tab space.
Remote control does not work · Before you press any function button, first select the correct source with the remote control instead of the main unit. · Insert the battery with its polarities (+/ signs) aligned as indicated. · Aim the remote control directly at the sensor on the front of the unit. [. . . ]