User manual PHILIPS LC1041

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS LC1041. We hope that this PHILIPS LC1041 user guide will be useful to you.


PHILIPS LC1041 : Download the complete user guide (3746 Ko)

You may also download the following manuals related to this product:

   PHILIPS LC1041 (3461 ko)
   PHILIPS LC1041 (3746 ko)
   PHILIPS LC1041 (3746 ko)

Manual abstract: user guide PHILIPS LC1041

Detailed instructions for use are in the User's Guide.

[. . . ] User guide ProScreen PXG10 multimedia projector ) Menu Menu D-Zoom c Auto syn OK Lens Input te A/V Mu Philips Creative Display Solutions IMPORTANT NOTE FOR USERS IN THE U. S. A. The responsible party of this multi media projector is the following: Philips Consumer Electronics Company One Philips Drive Knoxville, TN 37914 Telephone (1888) 873-4672 English WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This "bolt of lightning" indicates uninsulated material within your unit that may cause an electric shock. For the safety of everyone in your household, please do not remove product covering. [. . . ] Notes: ­ This projector uses a 5 BNC computer input to prevent deterioration of image quality. ­ When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA/UXGA) or Macintosh (i. e. ­ Connecting computers other than the recommended types may result in damage to the projector, the computer, or both. 11 English 7. INSTALLATION CONNECTING TO VIDEO EQUIPMENT Connecting to video equipment English General ­ The figures in brackets (1) correspond to the figures in the diagram on page 10. ­ Caution: Always turn off the projector while connecting to video equipment, in order to protect both the projector and the equipment being connected. VCR, Laser disc, other audiovisual equipment using standard video input Computer - RGB / Component inputs Data 1 in (15pin) Audio 1 Data 2 in Audio 2 DVD, DTV, other component video equipment using 5 BNC input Computer - RGB / Component inputs Data 1 in (15pin) Audio 1 Data 2 in Audio 2 Data 1 in (BNC) Data 1 in (BNC) G/G sync (Y) B (Pb) HD (C sync) VD (M) 15pin BNC R (Pr) (M) 15pin BNC R (Pr) (B) G/G sync (Y) B (Pb) HD (C sync) VD (E) APPARATEN SKALL ANSLUTAS TILL JODAT UTTAG. Audio in LR Video in Data out Audio out APPARATEN SKALL ANSLUTAS TILL JODAT UTTAG. Audio in LR Video in Data out Audio out (6) 110-120V / 220-240V~ (L) RS-232C S-Video in (K) 110-120V / 220-240V~ RS-232C S-Video in Optional (2) Scart/RCA adapter (Europe only) (4) (2) Video out L Audio R out L Audio R out Video BNC Video BNC out out 1. Connect the yellow RCA connector (K) to the corresponding yellow Video Input terminal on the projector and the Video output terminal on the video source. To use the built-in audio system, connect the red and white RCA connectors to the corresponding red and white Audio Input terminals on the projector (L) and the Audio output terminals on the video source. In case your VCR, Laser Disc player, video camera or TV is equipped with a Scart connector: 1. Connect the Scart/RCA Audio Video adapter supplied (4) to the Scart connector of the VCR, Laser Disc player, video camera or TV. Plug the video/audio connection cable (2) supplied into both the adapter and the Video in (K) and Audio in(L/R) sockets (L) of the projector. In case your Audiovisual equipment is equipped with a SVideo connector: The S-Video Input terminal uses a video signal system in which the picture is separated into a color and a luminance signal to realize a higher-quality image. Plug the S-Video connection cable supplied (5) into the Audiovisual equipment and the S-Video in socket (I) of the projector. Plug an audio connection cable (optional) or the video/audio connection cable (2) supplied into both the Audio in L/R sockets (L) of the projector and the Audio out L/R sockets of the Audiovisual equipment. Insert the white plug into the L socket and the red plug into the R socket. Note: If your video equipment does not have an S-video output terminal, use the Composite video output terminal. 12 1. To use the 5 BNC connector, slide the 15 pin/BNC switch (M) on the rear terminals to the BNC position. Connect each BNC connector to the corresponding BNC Input 1 terminals (E) on the projector. (BNC-RCA adapters (6) are included for use with RCA type cables and sources. ) 2. Connect the other end of the cable (2) to the corresponding terminals of a DVD player or DTV decoder. To use the built-in audio system, connect one end of the computer audio cable (optional) to Audio Input 1 terminal (B) on the projector. Connect the other end to the Audio output terminal on the video source. When connecting the projector to a DVD player or a DTV decoder equipped with Component video outputs, select "Component" for "Signal Type" in the GUI "Options" menu (see page 23). Note: After the use of "Component" when connecting to a computer , again, select "Computer/RGB" for "Signal Type" in the GUI menu (see page 23). 7. [. . . ] ­ Do not remove the lamp cage directly after operation of the projector. Wait at least one hour after the power cord is disconnected to allow the surface of the lamp cage to fully cool before removing the lamp cage. Be sure not to touch the glass surface of the lamp cage or the inside of the projector. 26 9. ­ To avoid injury to yourself and damage to the lamp, be sure to carefully follow the steps below. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS LC1041




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS LC1041 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.