User manual PHILIPS GC4513/30

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS GC4513/30. We hope that this PHILIPS GC4513/30 user guide will be useful to you.


PHILIPS GC4513/30 : Download the complete user guide (2392 Ko)

Manual abstract: user guide PHILIPS GC4513/30

Detailed instructions for use are in the User's Guide.

[. . . ] 2 Tilt the iron backwards and fill the water tank with tap water up to the maximum level. English Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. 7 Temperature and steam setting Table 1: Warning: Do not use steam or steam boost at low temperature, as indicated in the below table. [. . . ] According to the temperature you select, the iron automatically provides the optimal amount of steam for the best result. The temperature light goes on to indicate that the iron is heating up. 4 When the temperature light goes out, the iron has reached the correct temperature and you could start ironing. 8 English Features Spray funtion -- Press the spray button to moisten the article to be ironed. Steam boost function -- Press and release the steam boost trigger for a powerful boost of steam to remove stubborn creases. Ironing with extra steam -- For extra steam during ironing, press and hold the steam boost trigger. Vertical steam -- You can use the steam boost function when you hold the iron in vertical position for removing creases form hanging clothes, curtains etc. Eco steam setting / Dry ironing -- In stead of Auto steam, you could choose ECO setting in the steam slider to save energy, yet to achieve satisfactory ironing results. English 9 Safety auto-off (specific types only) The safety auto-off function automatically switches off the iron if it has not been used for 30 seconds resting on its soleplate or 8 minutes resting on its backplate. Scales is flushed out, steam and boiling water also come out of the soleplate. Note: Repeat steps 2 to 5 if the water that comes out of the iron still contains scale particles. 10 Move the iron gently over a piece of cloth to remove any water stains on the soleplate. English 11 Storage 1 Unplug the iron and empty the water tank. 2 Wind the mains cord around the backplate of the iron and store it on its heel. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. €If you are unable to solve the problem with the information below, visit www. Com/support for a list of frequently asked questions or contact the Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details). Problem Possible cause Solution Wait for a few seconds before you use the steam boost function again. [. . . ] You have used the steam The steam boost function does not boost function too often within a very short period. Set an ironing temperature at which the steam boost function can be used (●●● to MAX). use the Calc-clean funtion (see chaper ‘Cleaning and maintenance’ , section ‘Calc-clean function’). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS GC4513/30




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS GC4513/30 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.