User manual PHILIPS GC1910/02

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS GC1910/02. We hope that this PHILIPS GC1910/02 user guide will be useful to you.


PHILIPS GC1910/02 : Download the complete user guide (1742 Ko)

Manual abstract: user guide PHILIPS GC1910/02

Detailed instructions for use are in the User's Guide.

[. . . ] -- The soleplate of the iron can become extremely hot and may cause burns if touched. -- When you have finished ironing, when you clean the appliance, when you fill or empty the water tank and also when you leave the iron even for a short while: set the steam control to position O, put the iron on its heel and remove the mains plug from the wall socket. -- Always place and use the iron on a stable, level and horizontal surface. -- Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. [. . . ] , , The automatic shut-off light flashes to indicate that the iron has been switched off by the automatic shut-off function (Fig. To let the iron heat up again: 1 Pick up the iron or move it slightly. , , If the temperature of the soleplate has dropped below the set ironing temperature, the temperature light goes on. 2 If the temperature light goes on after you have moved the iron, wait for it to go out before you start ironing. Note: If the temperature light does not go on after you move the iron, the soleplate still has the right temperature and the iron is ready for use. Cleaning and maintenance Cleaning 1 Set the steam control to position O, remove the plug from the wall socket and let the iron cool down. 3 Wipe flakes and any other deposits off the soleplate with a damp cloth and a non-abrasive (liquid) cleaning agent. 12 English To keep the soleplate smooth,  avoid hard contact with metal objects. Never use a scouring pad, vinegar or other chemicals to clean the soleplate. Double-Active Calc System (specific types only) Note: See chapter  ‘General description’ for the type numbers that are equipped with the Double-Active Calc System. The Double-Active Calc System consists of an Anti-Calc tablet inside the water tank combined with the Calc-Clean function. The tablet is constantly active and does not need to be replaced (Fig. When flakes come out of the soleplate during ironing), use the Calc-Clean function more frequently. 7 Hold the iron over the sink and turn the steam control to the Calc-Clean position x. €15) English 13 8 Pull the steam control slightly upwards and gently shake the iron until all water in the tank has been used up (Fig. Note: Repeat the Calc-Clean process if the water that comes out of the iron still contains scale particles. After the Calc-Clean process 1 Put the plug in the wall socket and let the iron heat up to let the soleplate dry. 3 Move the iron gently over a piece of used cloth to remove any water stains that may have formed on the soleplate. Cleaning the steam control needle 1 Pull the steam control out of the appliance. €18) 2 Use vinegar to remove scale, if any, from the needle (Fig. Place the point of the needle exactly in the centre of the hole and fit the small projection on the side of the needle into the slot (Fig. Storage 1 Set the steam control to position O and remove the plug from the wall socket. [. . . ] For at holde strygesålen glat og uden ridser skal du sørge for at undgå kontakt med metalgenstande. Mulig årsag Du har anvendt dampskudsfunktionen for ofte inden for en meget kort periode. Kun nogle modeller: Du har anvendt dampskudsfunktionen for ofte inden for en kort periode. €1) A B C ----D E F G H I J K L M N O Spray (tout type à l’exception de GC1903/GC1910)  Bouchon de l’orifice de remplissage Commande de vapeur  O = pas de vapeur petit nuage = vapeur minimale grand nuage = vapeur maximale x = position Calc-clean Bouton spray 8 (tout type à l’exception de GC1903/GC1910) Bouton Effet pressing \ (tout type à l’exception de GC1903/ GC1905/GC1910/GC1920) Voyant d’arrêt automatique (GC1990/GC1991 uniquement) Thermostat Système anticalcaire double action (tout type à l’exception de GC1903/GC1905/GC1910/GC1920) Voyant de température Cordon d’alimentation Plaque signalétique Réservoir d’eau Indication de niveau d’eau maximal Semelle Housse de rangement résistant à la chaleur (GC1981/1991 uniquement) Important Lisez attentivement ce mode d’emploi avant d’utiliser l’appareil et conservez-le pour un usage ultérieur. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS GC1910/02




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS GC1910/02 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.