User manual PHILIPS AW1000

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS AW1000. We hope that this PHILIPS AW1000 user guide will be useful to you.


PHILIPS AW1000 : Download the complete user guide (2179 Ko)

You may also download the following manuals related to this product:

   PHILIPS AW1000 (3663 ko)
   PHILIPS AW1000 (3660 ko)
   PHILIPS AW1000 (3667 ko)
   PHILIPS AW1000 (3641 ko)
   PHILIPS AW1000 (3650 ko)
   PHILIPS AW1000 (3655 ko)
   PHILIPS AW1000 (3660 ko)
   PHILIPS AW1000 (3655 ko)
   PHILIPS AW1000 (3652 ko)
   PHILIPS AW1000 (3657 ko)
   PHILIPS AW1000 (3659 ko)
   PHILIPS AW1000 (3665 ko)
   PHILIPS AW1000 (3659 ko)
   PHILIPS AW1000 (3663 ko)
   PHILIPS AW1000 (3665 ko)
   PHILIPS AW1000 (3663 ko)
   PHILIPS AW1000 (3667 ko)
   PHILIPS AW1000 QUICK START GUIDE (1302 ko)
   PHILIPS AW1000 QUICK START GUIDE (1305 ko)
   PHILIPS AW1000 QUICK START GUIDE (1302 ko)
   PHILIPS AW1000 QUICK START GUIDE (1302 ko)
   PHILIPS AW1000 QUICK START GUIDE (1305 ko)
   PHILIPS AW1000 (3618 ko)
   PHILIPS AW1000 QUICK START GUIDE (1305 ko)

Manual abstract: user guide PHILIPS AW1000

Detailed instructions for use are in the User's Guide.

[. . . ] 1 ALARM 1: ­ BUZ (zer) - to activate buzzer for alarm 1 setting ­ RAD (io) - to activate radio for alarm 1 setting ­ OFF - to switch off alarm 1 2 ALARM 2: ­ BUZ (zer) - to activate buzzer for alarm 2 setting ­ RAD (io) - to activate radio for alarm 2 setting ­ OFF - to switch off alarm 2 3 RADIO - to switch radio mode ON/OFF 4 BRIGHTNESS - to adjust the display illumination: HI-LOW 5 Display - to show the hours, minutes and activated alarms 6 CLOCK: ­ TIME SET - to adjust clock time ­ ALARM 2 - to adjust/review ALARM 2 ­ ALARM 1 - to adjust/review ALARM 1 ­ RUN - to return to clock time display after setting clock/alarm times ­ 7, 4 - (fast up, slow down) - to adjust both the hours and minutes for the clock and alarm times 7 SLUMBER - to activate slumber time 8 ALARM RESET - to stop the active alarm for 24 hours 9 DBB - to select an enhanced bass sound: Dynamic Bass Boost 0 SLUMBER OFF / REPEAT ALARM ­ to switch off slumber ­ to stop the active alarm for a 7 minute period !$ Battery door - for power backup battery % Pigtail aerial - for FM reception ^ Mains lead - for mains supply Connect the mains plug into the wall socket. The mains supply is now switched on and the numbers on the display will start to flash. To disconnect the set from the mains completely, withdraw the mains plug from the wall socket. [. . . ] To disconnect the set from the mains completely, withdraw the mains plug from the wall socket. To improve radio reception ­ For MW (LW), the set is provided with a built-in aerial which to function best should be placed on a non-metallic surface e. ­ For FM reception extend the pigtail aerial at the back of the set completely to obtain optimum reception. Press and hold down the 4, 7 buttons to set and adjust both the hours and the minutes. ­ With your finger held down on 7, the time will increase rapidly and continuously from minutes to hours. ­ Pressing 4 will allow you to adjust the time slowly back minute by minute. To safeguard the clock time from being accidentally adjusted, turn the clock control to the RUN position. ­ If you have selected the radio mode, make sure you have adjusted the volume loud enough to wake you. BUZ on ALARM 1 is a low tone buzzer while BUZ on ALARM 2 is high tone. You can switch off the alarm in three ways: Unless you choose to cancel the alarm completely, the ALARM RESET option will be automatically selected after 59 minutes from the time your alarm first goes off. ­ To retain the clock time and the set alarm time (s) in the event of a power failure or disconnection, insert a 9 volt battery, type 6F22 (not supplied) into the battery compartment: this will act as a power back up. For clarity, the battery back up is used to retain the set clock and alarm time (s) only. As soon as the power supply returns, the display will indicate the correct time. Before inserting the battery, connect the power plug to the wall outlet. The service life depends on how often and for how long the power supply fails. Keep your finger on the button and the display will begin to count down from 59 to 00 minutes. You can switch off the radio before the slumber time has elapsed: ­ To cancel the SLUMBER function, press SLUMBER OFF/REPEAT ALARM. notes: ­ The slumber function does not affect the alarm setting (s). ­ If during SLUMBER you have turned down the volume and you have an alarm set in radio mode, make sure you have adjusted the volume loud enough to wake you up the next day. English 7 ­ If a fault occurs, first check the points listed below before taking the set for repair. [. . . ] notes: ­ The slumber function does not affect the alarm setting (s). ­ If during SLUMBER you have turned down the volume and you have an alarm set in radio mode, make sure you have adjusted the volume loud enough to wake you up the next day. English 7 ­ If a fault occurs, first check the points listed below before taking the set for repair. ­ If you are unable to remedy a problem by following the hints below, consult your dealer or service centre. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS AW1000




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS AW1000 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.