User manual PHILIPS 69149-48-PH

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS 69149-48-PH. We hope that this PHILIPS 69149-48-PH user guide will be useful to you.


PHILIPS 69149-48-PH : Download the complete user guide (5323 Ko)

Manual abstract: user guide PHILIPS 69149-48-PH

Detailed instructions for use are in the User's Guide.

[. . . ] LivingColors will flash 3 times, and then shortly flash in green color. the linked lamps will turn to the last setting of the remote control. - Repeat this operation for each LivingColors lamp that you want to link with the others. [. . . ] Drill two holes in the wall, as shown on drawing 4, put in plastic plugs first, and then screw the plate on the wall. Connect the earthing cable (usually yellow with black stripes) to the earthing connection (identified by the icon) inside the base of the luminaire (drawing 5). Observe the correct colour of the wiring during installation: blue (N) and brown (L). Connect these 2 wires accordingly from your power grid to the terminal blocks inside the base of the ceiling luminaire. Put the luminaire on the plate, which you had screwed to the wall earlier; fix it on both sides by screwing in a screw (drawing 7). Insert the connection plug from the tripod into the lamp ­ make sure you hear a click (drawing 8). Position the lamp on the tripod and direct LivingColors towards the wall (drawing 9). livingColors will show a short introduction of the colour possibilities. You can adjust the length of the luminaire by turning the ring in the middle of the stand, pulling the top part of the stand to the desired length, then turning the ring back to fix the position (drawing 10). You can also pull the luminaire to one or the other side to find the best position. Possible cause The lamp is not plugged in correctly Remote control is not working Solution Check the connections of the cord to the lamp Check that the plug is correctly placed in the wall socket See the following section Check the batteries in the remote control. The batteries should be correctly placed (+ and -) and should be charged. If the remote control is still not working, try replacing the batteries. link the remote to the LivingColors lamp by following the procedure under "2. Linking LivingColors lamps" Move LivingColors away from the wireless access point Make sure that all LivingColors connected to this remote are on; otherwise they will not respond after this action. Press simultaneously on "0" and ( ) for at least 5 seconds to switch to another channel (all LivingColors will flash green to confirm). [. . . ] Warranty: Philips' two-year warranty is valid if the product is used in accordance with the instructions and for its intended purpose. Claims will only be accepted on submission of the original proof of purchase (invoice, sales slip or receipt) stating the purchase date, the name of the dealer and a description of the product. The Philips warranty lapses if: - Anything has been changed, crossed out, deleted or rendered illegible on the purchase docket or product description. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS 69149-48-PH




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS 69149-48-PH will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.