User manual PANASONIC WHMHF09G3E8

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC WHMHF09G3E8. We hope that this PANASONIC WHMHF09G3E8 user guide will be useful to you.


PANASONIC WHMHF09G3E8 : Download the complete user guide (4219 Ko)

You may also download the following manuals related to this product:

   PANASONIC WHMHF09G3E8 (4370 ko)
   PANASONIC WHMHF09G3E8 (4370 ko)
   PANASONIC WHMHF09G3E8 (4370 ko)
   PANASONIC WHMHF09G3E8 (4370 ko)
   PANASONIC WHMHF09G3E8 (4370 ko)
   PANASONIC WHMHF09G3E8 (4370 ko)
   PANASONIC WHMHF09G3E8 (4370 ko)

Manual abstract: user guide PANASONIC WHMHF09G3E8

Detailed instructions for use are in the User's Guide.

[. . . ] Before operating the system, read these operating instructions thoroughly and keep them for future reference. Before use, make sure the system has been installed correctly by an authorised dealer according to the given instructions. • Panasonic (Mono bloc) Air-to-Water Heatpump is designed to operate with Panasonic Water Tank Unit. Unless used together with the Panasonic Water Tank Unit, Panasonic does not guarantee any normal operation nor the reliability of the system. [. . . ] 1 day ~ 99 days Do not use this menu for any other purposes and in period other than during construction (Refer to information page). –  Note: • The current day and time need to be set in cases below: - When the power is turned on for the first time. - A long time has elapsed since the power was turned on the last time. €¢ The current time that has been set will be the standard time for all the timer operations. Caution Indicator (Tank Temperature above 60 °C) To adjust initial settings English 7 How to use User The system is turned off by an external switch. Turn on or off the system Press When the system is ON, the operation LED is lit and the actual water outlet temperature and outdoor ambient temperature are shown on the display. HEAT • The mono bloc unit provides heat to the + TANK sanitary water tank and the system. €¢ This mode can be selected only when the sanitary water tank is installed. tANK • The sanitary water tank is either turned ON or OFF. €¢ The mono bloc unit provides heat to the sanitary water tank. €¢ The backup heater provides extra heat at low outdoor temperature. €¢ Once the backup heater is set, it is automatically operated when conditions are fulfilled. 2 Press • Dry concrete (does not show during normal operation) • The Water Inlet Temperature • Tank Temperature • Compressor Running Frequency • Error History • Heat mode total power consumption (Up to 999 days) • Tank mode total power consumption (Up to 999 days) • Press • Once the STATUS mode is entered, the display shows STATUS. €¢ The STATUS mode cannot be activated when the display shows SETTING. €¢ The total power consumption is an estimated value based on AC 230 V and may differ from value measured by precise equipment. Dealer User Dealer Operation/settings to be done only by the authorised dealer/specialist. Operation/settings to be done by the authorised dealer/specialist or user. Display Temperature setting System temperature setting The system controls the temperature for each menu based on the outdoor ambient temperature. €¢ To set or change the temperatures, make sure to contact your nearest authorised dealer. 1 Press and hold for 5 seconds to enter the temperature range setting mode. How to use 1 Press and hold for 5 seconds to enter the temperature range setting mode. During HEAT mode, the water outlet temperature is adjusted as <Water outlet is shown the diagram on the right. [. . . ] If a power failure occurs, the data kept from last hour will be displayed. Loud refrigerant noise continue for a • It is caused by protection control during deice operation at outdoor ambient temperature lower than -10°C. Operation LED is not lit or nothing is displayed on the remote control. Force Heater Mode Button • If a malfunction occurs in the system, the backup heater may be used to heat up the water. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC WHMHF09G3E8




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC WHMHF09G3E8 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.