User manual PANASONIC TX-50AS600Y

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC TX-50AS600Y. We hope that this PANASONIC TX-50AS600Y user guide will be useful to you.


PANASONIC TX-50AS600Y : Download the complete user guide (2166 Ko)

You may also download the following manuals related to this product:

   PANASONIC TX-50AS600Y (1623 ko)
   PANASONIC TX-50AS600Y (1626 ko)
   PANASONIC TX-50AS600Y (1723 ko)
   PANASONIC TX-50AS600Y (1601 ko)
   PANASONIC TX-50AS600Y (3096 ko)
   PANASONIC TX-50AS600Y (3096 ko)
   PANASONIC TX-50AS600Y (1635 ko)
   PANASONIC TX-50AS600Y (3096 ko)
   PANASONIC TX-50AS600Y (3096 ko)

Manual abstract: user guide PANASONIC TX-50AS600Y

Detailed instructions for use are in the User's Guide.

[. . . ] TX-32AS600Y TX-42AS600Y TX-32AS600YW TX-42AS600YW TX-39AS600Y TX-50AS600Y TX-39AS600YW Operating Instructions LCD Television 32-inch model 39-inch model 50-inch model 42-inch model For more detailed instructions, refer to [eHELP] (Built-in Operating Instructions). Please read these instructions carefully before operating this product and retain them for future reference. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. 4 ● For the information of the trademarks, refer to [eHELP] (Support > Licence). [. . . ] — Check the terminal type and cable plugs are correct when connecting. ) or equipment with an infrared sensor, otherwise distortion of image / sound may occur or operation of other equipment may be affected. Terminals 3 B 1 2 Removing the pedestal from the TV Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV. 1 Remove the assembly screws 3 Remove the assembly screws from the TV. 10) AV devices ■ DVD Recorder / VCR TV Basic connections ■ Mains lead AC 220-240 V 50 / 60 Hz Mains lead (supplied) Insert the mains plug firmly into place. 32-inch model 39-inch model 42-inch model 50-inch model Cable SCART cable RF cable DVD Recorder / VCR Terrestrial aerial ■ DVD Recorder (VCR) / Set top box ● When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first. TV ■ Aerial TV Cable Cable RF cable Terrestrial aerial ● For DVB-C, DVB-T, Analogue SCART cable RF cable HDMI cable Satellite dish Terrestrial aerial DVD Recorder / VCR Set top box English 9 Network To use internet service, you need a broadband network environment. 1 Standby On / Off switch 2 Off Timer ● Sets the time for the TV to automatically turn off. 12 English ■ Installing / Removing batteries Pull open Hook ● The LED blinks when the TV receives a command from the remote control. Close Note the correct polarity (+ or -) Indicator / Control panel ● When pressing 1, 2, 3 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight the pressed button. 1 2 3 4 Rear side of the TV 1 Input mode selection ● Press repeatedly until you reach the desired mode. [Main Menu] ● Press and hold for about 3 seconds to display main menu. OK (when in the menu system) 2 Channel Up / Down Cursor Up / Down (when in the menu system) 3 Volume Up / Down Cursor Left / Right (when in the menu system) 4 Mains power On / Off switch ● Use to switch the mains power. 5 Remote control signal receiver ● Do not place any objects between the TV remote control signal receiver and remote control. 6 Ambient sensor ● Senses brightness to adjust picture quality when [Ambient Sensor] in the Picture Menu is set to [On]. 7 Power LED Red: Standby Green: On English 5 6 7 13 First time Auto Setup Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time. — These steps are not necessary if the setup has been completed by your local dealer. 8 - 11) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment. Tick the TV signal mode to tune, and then select [Start Auto Setup] : tune (search for the available channels) : skip tuning ● Auto Setup screen varies depending on the country and the signal mode you select. ● [DVB-C Network Settings] Normally set [Frequency] and [Network ID] to [Auto]. If [Auto] is not displayed or if necessary, enter [Frequency] and [Network ID] specified by your cable provider with numeric buttons. [. . . ] Caution ● Do not use a hard cloth or rub the surface too hard, otherwise this may cause scratches on the surface. — Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. — The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the surface with your fingernail or other hard objects. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC TX-50AS600Y




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC TX-50AS600Y will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.