User manual PANASONIC SC-CMAX5E

[. . . ] Please read these instructions carefully before using this product, and save this manual for future use. Book 2 ページ ２０１５年６月１２日　金曜日　午前１１時２２分 Safety precautions WARNING Unit ≥ To reduce the risk of fire, electric shock or product damage, – Do not expose this unit to rain, moisture, dripping or splashing. € Do not place objects filled with liquids, such as vases, on this unit. battery ≥ Danger of explosion if battery is incorrectly replaced. [. . . ] 11 Illumination settings By the unit only You can change the illumination colour on the unit. The recordings are kept in a folder named “REC_DATA” in the USB device. Some tracks cannot be recorded because of the condition of the source. The recorded folder name may be different from the original folder because of the auto rename function. There will be no sound output during recording from [USB\A] to [USB\B]. Panasonic cannot be held responsible on the action of consumer to record copyrighted contents which can cause copyright infringement. TRK DEL ALB DEL FORMAT Adding track marks ([AUX]) When recording from external equipment, you can divide tracks using various modes. § Recording starts automatically when the other equipment starts to play. § §To add a track mark manually (except in “SYNCHRO” mode) Press [OK] at desired marking point during recording. Track length limit MANUAL: 60 minutes TIME MARK: 5 minutes When a track reaches its maximum length, a track mark will be added while recording continues. (The track length limit counter is reset when a track mark is added manually or when recording pauses. Prepare the music source you want to listen to (USB or external equipment) and set the volume. play timer 1 2 Press [SETUP] repeatedly to select “CLOCK”. Connect the USB device to [USB\B] Record timer and prepare the external equipment. 2 ≥ To check the time, press [SETUP] repeatedly to select “CLOCK” and then press [OK] once. ) ≥ The clock is reset when there is a power failure or when the AC mains lead is removed. ‰ To turn the timer off, press [3, 4] to clear “FPLAY” and “FREC”, and then press [OK]. 3 Sleep timer The sleep timer can turn the unit off after a set time. SLEEP120 ^--------------------- OFF (Cancel) (----------------b ≥ To confirm the remaining time, press [SLEEP] once. ‰ The play timer and sleep timer or the record timer and sleep timer can be used together. (For the timer to operate, the unit must be turned off before the timer start time. ) Play and record timer You can set the timer to come on at a certain time to: – wake you up (play timer) – record from the external equipment (record timer) Play timer and record timer cannot be used together. [. . . ] €REC ERROR” ≥ You disconnected the USB device while recording. € When “REMOTE 1” is displayed, press and hold [OK] and [ ] on the remote control for at least 4 seconds. € When “REMOTE 2” is displayed, press and hold [OK] and [USB] on the remote control for at least 4 seconds. “TEMP NG” ≥ The temperature protection circuit has been activated , and the system will switch off. [. . . ]