User manual PANASONIC KX-HNS104FX

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC KX-HNS104FX. We hope that this PANASONIC KX-HNS104FX user guide will be useful to you.


PANASONIC KX-HNS104FX : Download the complete user guide (460 Ko)

You may also download the following manuals related to this product:

   PANASONIC KXHNS104FX (513 ko)
   PANASONIC KXHNS104FX (3873 ko)
   PANASONIC KXHNS104FX (563 ko)
   PANASONIC KXHNS104FX (553 ko)
   PANASONIC KX-HNS104FX (2487 ko)
   PANASONIC KX-HNS104FX (626 ko)
   PANASONIC KX-HNS104FX (856 ko)
   PANASONIC KX-HNS104FX (856 ko)

Manual abstract: user guide PANASONIC KX-HNS104FX

Detailed instructions for use are in the User's Guide.

[. . . ] R All other trademarks identified herein are the property of their respective owners. 3 Important Information Disclaimer When properly installed and maintained, this product is designed to help provide an added layer of notice in the case of broken glass. Panasonic makes no representations or warranties that it will at all times, or under all circumstances, or in any given circumstance, detect broken glass, or work with all types of glass, or that it will prevent loss of or damage to property or persons. Panasonic shall have no liability for any personal injury, or damage to property or other loss, of any kind, should the product fail to warn or notify. proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. Installation R To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. [. . . ] For more information about collection and recycling, please contact your local municipality. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. In this case it complies with the requirement set by the Directive for the chemical involved. Note for the battery removal procedure Refer to “Inserting the batteries” on page 9. 1 2 7 Setup Part names and functions Indicator Green, lit Red, lit Red, blinking Green, blinking slowly Off Status No glass break detected Glass break was detected Sensor is out of range of the hub Registration mode (You pressed and held M N) No battery power A B C D Note: R The LED indicator does not indicate sensor status if the sensor has not been registered (page 10). E Microphone LED indicator MHIGHN/MLOWN Used to change the sensor sensitivity (page 17). Rear cover M N Used to confirm the status of the sensor or register the sensor to the hub. Setup overview 1 Initial setup Make sure you can access the system using your mobile device. Registration Required only if the sensor was purchased separately (i. e. , not as part of a bundle). Confirm the installation area Read the information in this document to confirm that the desired installation area is suitable to proper operation. Installation Install the sensor in the desired location. 2 3 LED indicator N and check the You can press M LED indicator to confirm the sensor’s status. After confirming the sensor’s status, we recommend turning the LED indicator off by pressing M N again as soon as possible, otherwise battery life may be reduced. 4 5 8 Setup Inserting the batteries R USE ONLY Alkaline batteries AA (LR6) size. R Place it with the “ ” mark facing upwards and slide it. 1 Remove the rear cover by pressing the upper sides of the cover (A) and sliding it down (B). A B 2 Insert the batteries. Note: R If the sensor’s battery power is low, a message will be displayed on the [Sensor] screen of the [Home Network] app. We recommend you check this screen periodically to ensure that the battery does not become fully discharged. For more information, refer to the User’s Guide (page 17). 9 Setup Registering the sensor This procedure is not required for devices that were included as part of a bundle. If you purchased devices separately (i. e. , not as part of a bundle), you must register each device to the hub. You can register each device by using the registration buttons or the [Home Network] app. Please read the following information before deciding where to install the sensor. Note: R The sensor’s features are not designed to be used in situations that require high reliability. We do not recommend use of the sensor’s features in these situations. R Panasonic takes no responsibility for any injury or damage caused by the use of the sensor. R The sensor may make false detections when there is noise from metallic blinds opening and closing, metallic bells of alarm clocks, etc. R The sensor is designed to detect the sound of glass breaking as a result of an impact. [. . . ] (Appropriate device required. ) – Telephone alert You can configure the system to call a preprogrammed phone number when the sensor is triggered. www. panasonic. net/pcc/support/tel/ homenetwork/manual/ 17 Appendix *2 Specifications R Standards DECT (Digital Enhanced Cordless Telecommunications) R Frequency range 1. 88 GHz – 1. 90 GHz R RF transmission power Approx: 10 mW (average power per channel) 250 mW (max. ) R Power source AA (LR6) Alkaline battery (2 ´ 1. 5 V) R Operating conditions 0 °C – 40 °C R Detection method Acoustic sensor R Sensor detection range Horizontal: approx. 2. 3 m when set to MLOWN R Battery life Up to 1 year*2 R Dimensions (height ´ width ´ depth) – With the rear cover attached: Approx. 72 mm ´ 73 mm ´ 39 mm – With the wall mounting adaptor attached: Approx. 72 mm ´ 73 mm ´ 61 mm R Mass (weight) – With the rear cover attached: Approx. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC KX-HNS104FX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC KX-HNS104FX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.