User manual PANASONIC EHPHS9K

[. . . ] Do not use in a way exceeding the rating of the household outlet or the wiring. --Exceeding the rating by connecting too many plugs to one household outlet may cause fire due to overheating. --Doing so may cause the wire in the cord to break with the load, and may cause electric shock or fire due to a short circuit. --Doing so may cause burn, electric shock, or fire due to a short circuit. [. . . ] Slide the appliance down entirely through of your hair without stopping. Recommended temperature for use depends on each hair type of condition. 9 English CAUTION ►Notes ●●This hair straightener is designed for Professional use in shops or salon to setting hair. —â—Effectiveness of nanoe™ and straightening may vary among individuals. Parts identification English A B C A Press Plate Tips B nanoe™ Outlet C Steam Inlet D Open/Close Lock E Cord F Plug G Iron Plate H nanoe™ Lamp I Temperature Setting Switch J Power Switch K Temperature Setting Lamp G D H I E Accessory L Cleaning Brush (for the nanoe™ Outlet) About Open/Close lock Slide the Open/Close lock (shaded area) to lock and unlock. Locked Unlocked K J F ►Note ●●Do not try to force open when locked. L 10 About the temperature control system Standby mode If the temperature setting is on 230 °C, 200 °C, or 180 °C and the straightener is left unused for approximately 10 minutes, the temperature will automatically lower to 170 °C. The indicator light will blink alternately between 230 °C, 200 °C, or 180 °C and 170 °C About nanoe™ nanoe™ is ion particles enveloped in water and is not visible to the naked eye. Since nanoe™ is generated by collecting water in the air, it may be difficult to generate in certain cases depending on the environment. This is due to the fact that water in the air is difficult to collect when the temperature and humidity level is low. (nanoe™ and negative ion generation method: High-voltage discharge) English What is nanoe™?How nanoe™ works Once the straightener is used again, or the [-] or [+] temperature setting switches are pressed, the temperature will return to 230 °C, 200 °C, or 180 °C. The 230 °C, 200 °C, or 180 °C light will blink and then light up. ) ►Note ●●Place hair in the center of the iron plate to use. (If hair is placed on edge of the iron plate, the straightener may not be able to detect it is in use. ) Generally hair has properties which make it easy to become positively charged with electricity. These properties attract strongly negatively charged nanoe™ which penetrates the hair with moisture. Furthermore, they make the hair slightly acidic, tighten cuticles and keep your hair strong, elastic and healthy. –ºNotes ●●You may notice a characteristic odor when using this appliance. This is caused by the ozone it generates and is not harmful to the human body. —â—A humming noise may come out of the nanoe™ Outlet, but this is the sound of nanoe™ being discharged and is not a malfunction. Automatic OFF function This unit will automatically turn off when 60 minutes have passed from the start of use. [. . . ] The time to reach operating temperature (approximately 100 °C) differs depending on the area. 100 - 120 V: about 30 seconds 220 - 240 V: about 30 seconds It takes time to reach operating temperature. If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic for repair. Specifications Power source Power consumption 100 - 120 V 50 - 60 Hz 38 W 220 - 240 V 50 - 60 Hz The amount of power consumption is determined as the arithmetic mean value of the power input occurring during a representative period. [. . . ]