User manual OLYMPUS VN-2100PC

[. . . ] You can choose between 0 to 30. b Current file number c Playing time 4 Notes on the Folders * PC (USB) terminal. . . . VN-1100PC/VN-2100PC/VN-3100PC 4 Canceling Playback 4 To Pause Recording To Pause Press the REC button during recording. "PAUSE" appears on the display and the record/play indicator light flashes. The recorder stops in the middle of the file being played. 4 Inserting Batteries Built-in speaker The recorder provides four folders, A, B, C, and D (D is for VN-2100/ VN-2100PC/VN-3100/VN-3100PC only). [. . . ] When the batteries are depleted, appears on the display, and the recorder shuts off. It is recommended to set the HOLD switch to the HOLD position before you replace batteries to maintain the current settings (Time/Date, etc. ). For your convenience, the recorder also logs the current settings in nonvolatile memory at hourly intervals. s When the slow playback mode is selected, the "SLOW" appears and, for the fast playback mode, "FAST" appears on the display while the recorder is playing back. s The recorder stops playing when you press the STOP button while playing back in the slow/fast mode, or when it reaches to the end of the file. If you once press the STOP button and start playback again, the recorder will play back files in normal speed as well. For customers in Europe "CE" mark indicates that this product complies with the European requirements for safety, health, environment and customer protection. This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the EU countries. Please use the return and collection systems available in your country for the disposal of this product. Applicable Product : VN-3100/VN-3100PC/VN-2100/VN-2100PC/VN-1100/VN-1100PC 4 Power Supply The HOLD switch functions as a power button. When you do not use the recorder, set the HOLD switch to the HOLD position while the recorder is stopped. Power off. . . Set the HOLD switch to the HOLD position. HOLD Press the + or ­ button to set the minute. Repeat steps 5 and 6 to continue to set the year, month and date in the same way. 4 LCD Display Information You can select an option for the display of the recorder. This help review and confirm different recorder settings and file information. State of the recorder While in stop mode While in record mode While in stop mode or playback mode Operation Display 4 Locating the Beginning of the File While the recorder is playing back or playing back in slow/fast mode, pressing the 9 or 0 button forwards or rewinds to the beginning of the next file or the file being played respectively. If an index mark is encountered midway, playback begins at that point. (See "Index Marks" for details) 7 After setting the date, press the PLAY or 9 button. This completes the time/date setup procedure. Press and hold the STOP button Press the DISPLAY button Press the DISPLAY button The total number of files recorded in the folder and remaining recording time appears on the display. The display switches between current recording time and remaining recording time. Playing time Remaining playing time Recording date of the file Recording time of the file Playing time . . 4 Listening with Earphones You can listen to files by connecting earphones to the earphone jack. Sound will be played back monaurally. s To avoid irritation to the ear, insert the earphone after turn down the volume level. s When you listen with the earphone during playback, do not raise the volume too much. You can use any standard 3. 5mm monaural earphone or headphone. Standby Mode and Display Shut Off If the recorder is stopped or paused for 60 minutes or longer during recording or play back, it goes into Standby (power-save) mode, and the display shuts off. Do not attempt to recharge alkaline, lithium or any other non-rechargeable batteries. If you notice anything unusual when using this product such as abnormal noise, heat, smoke, or a burning odor: 1 remove the batteries immediately while being careful not to burn yourself, and; 2 call your dealer or local Olympus representative for servicing. Troubleshooting Q1 Nothing happens when a button is pressed. Q2 No sound or quiet sound is heard from the speaker while playing back. [. . . ] s With this function, you can set only the start and the end time of recording. The current settings of the recording mode, microphone sensitivity, VCVA and folder are applied for the settings before you set timer-controlled recording. s You can record at any time even it is not within the specified recording duration. However, if that makes the remaining recording time insufficient for the timer-controlled recording, the recording will not complete. [. . . ]