User manual OLYMPUS PT-046

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual OLYMPUS PT-046. We hope that this OLYMPUS PT-046 user guide will be useful to you.


OLYMPUS PT-046 : Download the complete user guide (13170 Ko)

Manual abstract: user guide OLYMPUS PT-046

Detailed instructions for use are in the User's Guide.

[. . . ] 5mm×99mm×78mm 305g Jp PT-046 O POL-041 SILCA-5S PSOLG-2 PRLC-11 PSOLG-1PSOLG-3 PWT-030 JP 27 MEMO En Thank you for buying the Underwater Case PT-046 (hereinafter Case). Please read this instruction manual carefully and use the product safely and correctly. Wrong use may cause damage to the camera inside the Case due to water leakage, and repair may not be possible. Introduction Unauthorized copying of this manual in part or in full, except for private use, is prohibited. [. . . ] CAUTION: If a leak is detected in normal handling, do not use the Case and contact Olympus. Install the digital camera Check the digital camera En Check the digital camera before loading it in the Case. Battery Confirmation The flash is used very frequently during underwater shooting. Before diving, make sure that you have enough remaining battery power. Confirmation of the Remaining Number of Pictures to be Taken Confirm that the image storage has a sufficient remaining number of pictures to be taken. When a digital camera is loaded without removing the strap, the strap may get caught between the Case lids and may cause water leakage. EN 13 Open the Case 1 Slide and hold the slide lock towards the arrow direction (1 of figure below) and turn the open/close dial counter clockwise (2 of figure below). 2 Turn the open/close dial to the position where it cannot be turned further. En 1 Slide lock 2 Open Open/close dial CAUTION: Do not exert too much force while turning the open/close dial. EN 14 Load the digital camera 1 Confirm that the digital camera is OFF. 3 Insert a silica gel bag (1g) between the bottom of the digital camera and the Case. En 2 3 CAUTION: The silica gel bag will be caught when the Case is sealed and water leakage will occur. Once silica gel has been used, the moisture absorption performance will be impaired. Make sure the camera is loaded properly Check the following points before sealing the Case. Is there any dirt or foreign matter on the O-ring or the O-ring contact surface on the front lid? en Close CAUTION: · If the open/close dial is not fully turned, the Case will not be sealed. Close the rear lid of the Case so that the lens cap strap doesn't catch. Check the operation of the loaded camera After sealing the Case, check that the camera operations normally. 1 Push the ON/OFF button on the Case and confirm that the camera turns ON/OFF. 2 Operate the control buttons on the Case and confirm that the camera functions properly. 3 Press the shutter button on the Case and confirm that the camera shutter releases. EN 16 Perform the final checks Visual Inspection After sealing the Case, check the sealing part of front and rear lid visually to confirm that the O-ring is not twisted or out of the groove and that no foreign matter has been caught. [. . . ] ) 3 Hold the O-ring with your fingertips after it has come out of the groove and remove it from the Case. After visually checking that dirt has been removed from the O-ring, checks for sand and other foreign matter adhered, damage and cracks can be done by squeezing the entire circumference of the O-ring lightly with your fingertips. EN 23 Remove any foreign matter adhered to the O-ring groove using a lint-free clean cloth or cotton swab. Also remove any sand or dirt adhered to the O-ring contact surface on the front lid of the case. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE OLYMPUS PT-046




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OLYMPUS PT-046 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.