User manual OLYMPUS C-3030 ZOOM

[. . . ] Before using your camera, read this manual carefully to ensure correct use. We recommend that you take test shots to get accustomed to your camera before taking important photographs. Names of parts CAMERA 1 Control panel 2 Zoom lever 3 Flash 4 Selftimer/Remote control signal 5 Remote control window 6 Diopter adjustment dial 7Strap hook 8 Connector cover 9 Lens 0 Microphone ! extension flash connector cover (The connector is located beneath the cover. [. . . ] Slow shutter synchronization flash mode Press the Menu button, then press the top/bottom arrows on the Jog dial to select SLOW . press the right arrow on the Jog dial , then press the top/bottom arrows to select 1 or 2. Select 1 for capturing images at the beginning of the shutter release duration. When 2 is selected, the flash will fire a pre-flash before the regular flash. If you take a picture without pressing the OK button, the setting will be valid until the Menu is canceled. Taking photographs using the FL-40 extension flash If the FL-40 extension flash (optional) is used, the flash mode and exposure compensation are detected automatically, allowing the main flash and extension flash to function together. The FL-40 extension flash can be used to take various kinds of flash photographs, either by itself or together with the main flash. to connect the extension flash to the camera , the exclusive grip (optional) and bracket cable (optional) are required. Mount the FL-40 extension flash on the exclusive grip, then fasten it to the camera's tripod hole and connect the exclusive grip and the camera's extension flash connection terminal using the exclusive bracket cable. When using the FL-40 extension flash only: Press the Menu button, then press the top/bottom arrows on the Jog dial to select FLASH and press the right arrow on the Jog dial. Do not connect any cable other than the exclusive bracket cable to the camera's extension flash connection terminal. Selected images can be reserved in a SmartMedia card for printing on a printer or at a photo lab that supports the DPOF (Digital Print Order Format) system. single-frame print reserve Press the Print button ( ) , press the top/bottom arrows on the Jog dial to select and press the OK button. To select the desired picture, press the arrows on the Jog dial, then press the OK button. To set print reserve for more pictures, press the arrows to select another image. To select the desired picture, press the arrows on the Jog dial, then press the OK button. To set the top left corner of the picture, press the arrows to move the cursor and press the OK button at the desired point. To set the bottom right corner, press the arrows to move the cursor and press the OK button at the desired point. ⷠIf a card contains DPOF reservations set by another device, entering reservations using this camera may overwrite the previous reservations. If there are no pictures with print reserve settings in a card, this screen is not displayed. 0 SP3 or later Available HD space: 100MB or more RAM: 32MB or more (64MB or more recommended) Connectors:USB port (USB connection) RS-232C port (serial connection) D-SUB 9-pin connector (serial connection) Monitor: More than 32000 colors Minimum monitor resolution: 800 x 600 pixels · USB support is not available under the following environments, even for PCs equipped with a USB port. To record or play back sound, a sound card and a microphone are required. [. . . ] For more information, please consult the dealer where the unit was purchased. ⷠDo not keep the AC adaptor connected when not using the camera, otherwise fire, electric shock or damage may result. ⷠTo prevent electric shock and damage, do not plug, connect or handle the AC adaptor with wet hands. ⷠDo not modify, bend forcibly, pull strongly, scratch, etc. [. . . ]