User manual OLYMPUS C-200 ZOOM

[. . . ] Before you use this camera, read this manual and then store it in a safe location where you can find it for future use. We recommend that you spend some time taking test shots and experimenting with all of the features before you take important pictures. For more details on the functions described here, refer to the software CD's instructions on CDROM. For more details on the functions described here, refer to the camera' s Reference Manual on the software CD. [. . . ] Push the zoom level toward W (wide angle) to capture a wide area in the shot. Pull the zoom lever toward T (telephoto) to zoom in and make subjects appear larger. With the lens barrier open, quickly press the monitor button ( ) twice to display the most recent shot on the monitor. Use the arrow pad buttons to browse the other images stored on the card. : Previous image : Next image : Back to previous 10th image : Forward to next 10th image To return to shooting, press the monitor button ( ) once. If you want to take a picture while viewing stored pictures, compose the picture in the viewfinder, and then full press the shutter button. Position the subject in the picture frame, then press the shutter button all the way down. If you continue shooting, the level reaches the top and the camera stops shooting. Remaining second count Indicates the time remaining before the camera must stop shooting. When playing back movie pictures, before going to the playback menu, the images with the movie " " mark that you would like to play back have to be displayed. While the camera is on pause, the following operations are possible: : Returns to the beginning of the movie pictures. : Fast forward : Rewind To resume playback, quickly press on the arrow pad. The functions available for the playback mode can also be used for Quick View. If the camera is left untouched for three minutes when using the batteries, it automatically turns off. It is strongly recommended, however, that you switch power off promptly when you are finished using the camera. When using new batteries, it may take longer for the camera to shut down automatically depending on the type of batteries being used. the camera switches on and displays the most recent shot on the monitor. Use the arrow pad buttons to browse the other images stored on the card. : Previous image : Next image : Back to previous 10th image : Forward to next 10th image Important shooting information (record mode, resolution, etc. to fully display the desired frame , pull the zoom lever to Telephoto ( ). Use the arrow pad to scroll and view other parts of the picture that you cannot see. Press the monitor button with the lens barrier closed to turn on power in playback mode and display the last image taken. [. . . ] (Playback) ROTATE Allows individual images Rotated playback taken with the camera on its side to be rotated so that they are played back vertically. INFO Selects whether or not to Image information display image information set (OFF) during shooting on the monitor. Allows setting of the number of images that will be shown on the monitor at one time when index display is being used. Selects whether or not to have the camera use beeping sounds to indicate alerts. [. . . ]