User manual OLYMPUS Μ TOUGH-3000

[. . . ] DIGITAL CAMERA STYLUS TOUGH-3000 TOUGH-3000 Instruction Manual Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. The application software and instruction manual PDF file are stored on the internal memory of the camera. We recommend that you take test shots to get accustomed to your camera before taking important photographs. [. . . ] Making new DPOF reservations with this camera will erase the reservations made by the other device. DPOF print reservations can be made for up to 999 images per card. NO DATE TIME BACK MENU SET OK 5 Use FG to select the [X] (date print) screen option, and press the A button. Submenu 2 Application This prints the image only. This prints the image with the shooting time. PRINT ORDER 1 ( 1) Single-frame print reservations [<] NO DATE TIME 1 2 Display the [SETUP] menu. "Using the Menu" (p. 4) From the playback menu q, select [PRINT ORDER] and then press the A button. PRINT ORDER SET CANCEL BACK MENU SET OK < U 6 SET OK Use FG to select [SET], and press the A button. EXIT MENU 50 EN Reserving one print each of all images on the card [U] Resetting the print reservation data for selected images 1 2 3 Follow Steps 1 and 2 in [<] (p. Follow Steps 5 and 6 in [<]. 1 2 3 4 Follow Steps 1 and 2 in [<] (p. Use HI to select the image with the print reservation you want to cancel. If necessary, repeat Step 4, and then press the A button when finished. Use FG to select the [X] (date print) screen option, and press the A button. The settings are applied to the remaining images with the print reservation data. Resetting all print reservation data 1 2 Follow Steps 1 and 2 in [<] (p. Select either [<] or [U], and press the A button. PRINT ORDER SETTING PRINT ORDERED RESET KEEP BACK MENU SET OK 5 6 7 3 Use FG to select [SET], and press the A button. Use FG to select [RESET], and press the A button. EN 51 Usage Tips If the camera does not work as intended, or if an error message is displayed on the screen, and you are unsure of what to do, refer to the information below to fix the problem(s). Monitor "Difficult to see". Condensation*1 may have occurred. Turn off the power, and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures. *1 Dew drops can form in the camera when it is suddenly taken from a cold location into a warm, humid room. Troubleshooting Battery "The camera does not work even when batteries are installed". "Vertical lines appear on the screen". Insert recharged batteries in the correct direction. "Inserting the battery" (p. 10), "Charging the battery with the included USB-AC adapter" (p. 12) This condition may occur when the camera is pointed at an extremely bright subject under a clear sky and so on. The lines do not appear, however, in the final image. Battery performance may have been reduced temporarily due to low temperature. Take the batteries out of the camera, and warm them by putting them in your pocket for a while. "The light is caught in the picture". Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. Card/Internal memory "An error message is displayed". "Error message" (p. 53) Date and time function "Date and time settings return to the default setting". If the batteries are removed and left out of the camera for about 1 day*2, the date and time settings return to the default setting, and must be reset. *2 The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded. 13) Shutter button "No picture is taken when the shutter button is pressed". Cancel sleep mode. To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. No picture is taken even if the shutter button is fully pressed in this mode. Operate the zoom buttons or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left for another 12 minutes, it automatically turns off. Press the n button to turn the camera on. Miscellaneous "The camera makes a noise when taking pictures". The camera may activate the lens and make a noise even if no operation is performed. [. . . ] When any alterations whatsoever are made to the Warranty Certificate regarding the year, month and date of purchase, the customer's name, the dealer's name, and the serial number. When proof of purchase is not presented with this Warranty Certificate. 4 This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment, such as the case, strap, lens cap and batteries. 5 Olympus' sole liability under this warranty shall be limited to repairing or replacing the product and any liability for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect in the product, and in particular any loss or damage caused to any film or lenses or other equipment or accessories used with the product or for any loss resulting from delay in repair, is excluded. Notes; 1 This Warranty is in addition to and does not affect the customer's statutory right. [. . . ]