User manual NOKIA N72-5

[. . . ] Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted. You can also back up information from your device to a compatible memory card, for example: · Reduced Size MultiMediaCard (RS-MMC) memory card . · MultiMediaCard (MMC) adapter . You do not need the adapter when you use the RS-MMC in your Nokia N72. The adapter allows you to use the RS-MMC in another compatible device that has a full-size MMC slot. [. . . ] Place your finger in the recess on top of the door, and lift out the door. 2 Insert a compatible memory card in the slot (8). Make sure that the contact area on the card is facing up and the bevelled corner is facing the base of the device. 3 Push the card in (9). You cannot use the memory card if the door is open. Eject the memory card 1 Open the door of the memory card slot. Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. 5 Charge the battery 1 Connect a compatible charger to a wall outlet. If the battery is completely discharged, it may take a few minutes before the charging indicator is shown. Disconnect the charger, first from the device, then from the wall outlet. Headset Connect a compatible headset to the Pop-PortTM connector of your device. Warning: When you use a headset, your ability to hear outside sounds may be affected. To use standard stereo 3. 5 mm headphones use Nokia Audio Adapter AD-49. Plug the cable of the adapter into the Pop-PortTM connector of your Nokia N72 and plug your headphones into the connector at the top of the adapter. Shown if Ringing type is set to Silent and Message alert tone, IM alert tone, and E-mail alert tone are set to Off. If you have two phone lines, the divert indicator for the first line is and for the second . The connection to a headset with Bluetooth connectivity has been lost. A data call is active. 10 GPRS or EDGE packet data connection is available. An e-mail that has been read is waiting for you to retrieve to your device. An e-mail that has not been read is waiting for you to retrieve to your device. Keypad lock (keyguard) Use the keypad lock to prevent the keys from being accidentally pressed. When the keys are locked, is shown on When the keypad lock is on, calls may be possible to the official emergency number programmed into your device. Opening the camera lens cover deactivates the keypad lock, if it is on. Closing the camera lens cover returns the device to the previous mode, and keypad lock is reactivated, if it was on. To turn on the display light when the keypad lock is on, press . 11 Standby mode shortcuts · To switch between applications that are open, press and hold . [. . . ] Leaving applications running in the background increases the demand on battery power and reduces the battery life. For further shortcuts available in the standby mode, see the user guide for your device. Tips for efficient use · When you take a picture or record a video, press to start sending the item as a multimedia message. You cannot send video clips that are saved in the . mp4 format in a multimedia message. · In the standby mode, press to open the last dialled numbers list. [. . . ]