User manual NOKIA BLUETOOTH HEADSET BH-101

[. . . ] You can use the headset with compatible phones that support Bluetooth wireless technology. Also, read the user guide for your phone, which provides important safety and maintenance information. The phone and the headset do not need to be in line of sight, but they should be within 10 metres (33 feet) of each other. [. . . ] The need to make the connection headset tries to connect to a paired separately after pairing. need to pair the headset with your To switch off, press and hold the phone once. multifunction key (for about 5 seconds) until the headset beeps and If the pairing is successful, the headset appears in the phone menu the red indicator light flashes once. where you can view the currently Pair the headset paired Bluetooth devices. Ensure that your phone is switched When the headset is connected to on and the headset is switched off. your phone and is ready for use, the green indicator light flashes slowly. Press and hold the multifunction key (for about 8 seconds) until the green indicator light starts to flash quickly. When battery power is low, the headset beeps once every minute and the red indicator light flashes slowly. ENGLISH Basic use Place the headset on the ear The headset is ready to be used on the right ear. Slide the earloop over your ear (11), and gently push the earpiece into your ear. flip it, and attach it so that the loop is to the left of the "Nokia" logo (9). If your phone supports voice dialling with the headset, press and hold the multifunction key for about 2 to 3 seconds until the phone starts voice dialling, and proceed as described in the user guide of the phone. To switch the call between the headset and a compatible phone, press and hold the multifunction key for about 2 to 3 seconds. Call handling To make a call, use your phone in the normal way when the headset is connected to your phone. If your phone supports last number redialling with the headset, press the multifunction key twice while no call is in progress. Clear settings or reset To delete the pairings from the headset, switch on the headset, and press and hold the multifunction key ENGLISH and the volume up key for about 5 seconds until the indicator light alternates between red and green. To reset the headset if it stops functioning, although it is charged, press and hold the multifunction key, and plug the headset into a charger. Troubleshooting If you cannot connect the headset to your compatible phone, check that the headset is charged, switched on, and paired with your phone. Battery information Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard. If a battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger, then disconnect and reconnect it to begin charging the battery. [. . . ] When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. · · · · ENGLISH · Do not paint the device. If the product is not working properly, take it to the nearest authorised service facility for service. [. . . ]