User manual NAVIGON 8410

[. . . ] User's manual NAVIGON 8410 English (United Kingdom) August 2009 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-oflife. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. Imprint NAVIGON AG Schottmüllerstraße 20A D-20251 Hamburg The information contained herein may be changed at any time without prior notification. Neither this manual nor any parts thereof may be reproduced for any purpose whatsoever without the express written consent of NAVIGON AG, nor may they be transmitted in any form either electronically or mechanically, including photocopying and recording. [. . . ] To start the navigation, tap on the button for the route (see figure, point 4) you want to use for the navigation. If you display a planned or loaded route, the route may be recalculated. The starting point for the calculation will now be your current location. You will first be guided to the first route point entered. Tap on Options > Turn-by-Turn List to view detailed directions for the route. (Refer to "Turn-by-Turn List" page 76) Tap on (Destination search) in order to view the map in Destination search mode. (Refer to "Map in Destination search mode" page 64) 9. 4 Map in Navigation mode How you are guided to your destination depends on various factors (the route profile selected, your current location, the type of route planning, etc. ). Your navigation system automatically selects the optimum method. 9. 4. 1 Navigation in Vehicle mode After the route was shown in Preview mode, navigation was started. The map opens in Navigation mode. - 56 - Working with the map User's manual NAVIGON 8410 1 2 3 4 5 Here is shown what signposts should be followed. Here you can see any speed limits, warning signs or prohibiting signs (refer also to "Warn from bends" on page 73). When two manoeuvres need to be executed in quick succession, the small arrow box indicates the second manoeuvre to be executed. The large arrow box shows a diagram of the next junction which you should turn on to. As you get closer to the junction you will see a spot diagram in addition to the distance: The nearer you get to the junction, the more yellow spots are displayed. If you don't have to change direction for a long time, you will see only a straight arrow. The distance you must continue straight on is indicated underneath the arrow. Tap on the large arrow box to hear current route instructions. 6 The Traffic Information box opens if a reported traffic obstruction affects your route. If a distance is indicated in the Traffic Information box, no detour route was calculated yet for the traffic obstruction in question. Tap on the Traffic Information box in order to open the PREVIEW TMC window. It shows a map view with the route section affected by the message and a possible detour. Working with the map - 57 - User's manual NAVIGON 8410 If no distance is indicated, all the obstructions which are reported for your route and would lead to a loss of time will be avoided. Tap on the Traffic Information box in order to open the TRAFFIC INFORMATION window. (Refer to "Displaying traffic messages" on page 78) Note: The calculation of detour routes to avoid reported traffic obstructions can be performed automatically. (Refer to "TMC Settings" on page 80) 7 The Parking button appears when you are near your destination. If you tap on this box you will be given two options: You can select a car park from where you can then continue on foot. When you have parked your vehicle, you can save the current position and continue the navigation on foot. For a description of the Parking function refer to chapter "Parking near the destination" on page 71. 8 Ahead of many junctions the information from points 9 and 10 is hidden. Instead you are shown which lanes lead to your destination. Tap on the box in order to hide the lane information. 9 10 The height above sea level and the current speed are shown here. [. . . ] Press the (On/Off) switch for at least 6 seconds. The device is now deactivated. Press the (On/Off) key and keep it pressed until the device switches on again. Your settings and your saved destinations and routes will be retained. It seems to me that the battery of my NAVIGON 8410 becomes flat relatively quickly when the device is not connected to an external power supply. Some settings can be configured so that energy consumption is minimised. [. . . ]