User manual MIELE DA 402
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MIELE DA 402. We hope that this MIELE DA 402 user guide will be useful to you.
You may also download the following manuals related to this product:
MIELE DA 402 (804 ko)
MIELE DA 402 (807 ko)
MIELE DA 402 INSTALLATION MANUAL (394 ko)
MIELE DA 402 (947 ko)
MIELE DA 402 INSTALLATION (394 ko)
MIELE DA 402 INSTALLATION MANUAL (394 ko)
Manual abstract: user guide MIELE DA 402
Detailed instructions for use are in the User's Guide.
[. . . ] Operating and Installation Instructions
Ventilation System DA 402
To prevent accidents and machine damage, read these instructions before installation or use.
UV
M. -Nr. 06 473 980
Contents
IMPORTANT SAFETY INSTRUCTIONS Functional description Guide to the appliance Operation Turning on the fan . 18 After Sales Service Installation instructions Caring for the environment Installation accessories Plywood backing Electrical data Appliance dimensions Installation Installation instructions . 32
2
IMPORTANT SAFETY INSTRUCTIONS
Read these Operating Instructions carefully before installing or using the Ventilation System.
This appliance is intended for residential use only. [. . . ] Press once = 5 minute delay (left indicator lights) Press twice = 15 minute delay (right indicator lights) To cancel the Delayed Shut Down feature press the button again.
Automatic Safety Shut Off The fan will turn off automatically 10 hours after the last button was activated. The lighting however will remain on.
^ Press the On/Off button to turn the fan back on again.
12
Operation
Turning the lighting on/off
The overhead lighting can be turned on and off independently from the fan.
Dimming the lighting
The brightness of the lighting can be adjusted. The lighting will dim until the button is released.
^ Press the light button briefly to turn on the lighting. The light button indicator will go out.
^ If the button is pressed again, the lighting will brighten until the button is released. Stainless steel Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner. To help prevent resoiling, a conditioner for stainless steel can be applied. Controls These controls may become discolored or damaged if not cleaned regularly. Do not use a stainless steel cleaner on these controls.
Cleaning the casing
Warning: Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the hood. ^ All external surfaces and controls can be cleaned with warm water and liquid dish soap applied with a soft sponge. Avoid: cleaning agents containing soda, acids or chlorides, abrasive cleaning agents e. g. pot scourers or sponges which have been previously used with abrasive cleaning agents. These will damage the surface.
16
Cleaning and Care
Grease filters
The reusable metal grease filters remove solid particles from the vented kitchen air (grease, dust, etc). Cleaning the grease filters ^ - By hand: use a scrub brush in warm water with a mild detergent. - In a dishwasher: place the filters vertically in the lower basket, making sure that the spray arm is not blocked. Wash using the "Sani Wash" or "Normal Plus" programs. Depending on the detergent, cleaning the grease filters in a dishwasher may cause permanent discoloration of the filter surface. ^ While the filters are removed, clean any dirt or grease from the filter casing to prevent the risk of fire. When putting the grease filters back make sure that the locking clips are visibly facing the cooking surface. Lower the filter 45°, 2, unhook it at the rear, 3, and take it out. If the filters are incorrectly installed, insert a small screwdriver into the slit along its edge to disengage it from the casing. ^ After returning the grease filters, press and hold the grease filter button for 3 seconds to reset the timer. ^ If the grease filters are cleaned before the grease filter timer has reached its maximum, press the grease filter button for 6 seconds to reset the counter to zero.
The grease filters should be cleaned every 3 - 4 weeks or when the grease filter indicator lights. [. . . ] 26" (65 cm) is recommended for all installations to allow for optimum work space under the hood. Read the entire installation procedure and determine height (S) before beginning the installation. If the hood is fitted flush to the ceiling make sure that the remaining distance to the ceiling is not greater or less than appliance height (H). (720 - 1015 mm) To fit the chimney, the distance between the top of the chimney and the ceiling must be at least 7/8" (20 mm). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MIELE DA 402
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MIELE DA 402 will begin.