User manual M-AUDIO PRO TOOLS M-POWERED ESSENTIAL MENUS GUIDE

[. . . ] Menus Guide Pro Tools® M-PoweredTM Essential Version 8. 0. 2 Legal Notices This guide is copyrighted ©2009 by Digidesign, a division of Avid Technology, Inc. Under copyright laws, this guide may not be duplicated in whole or in part without the written consent of Digidesign. 003, 96 I/O, 96i I/O, 192 Digital I/O, 192 I/O, 888|24 I/O, 882|20 I/O, 1622 I/O, 24-Bit ADAT Bridge I/O, AudioSuite, Avid, Avid DNA, Avid Mojo, Avid Unity, Avid Unity ISIS, Avid Xpress, AVoption, Beat Detective, Bomb Factory, Bruno, C|24, Command|8, Control|24, D-Command, D-Control, D-Fi, D-fx, D-Show, D-Verb, DAE, Digi 002, DigiBase, DigiDelivery, Digidesign, Digidesign Audio Engine, Digidesign Intelligent Noise Reduction, Digidesign TDM Bus, DigiDrive, DigiRack, DigiTest, DigiTranslator, DINR, D-Show, DV Toolkit, EditPack, Eleven, Hybrid, Impact, Interplay, M-Audio, MachineControl, Maxim, Mbox, MediaComposer, MIDI I/O, MIX, MultiShell, OMF, OMF Interchange, PRE, ProControl, Pro Tools M-Powered, Pro Tools, Pro Tools|HD, Pro Tools LE, QuickPunch, Reel Tape, Reso, Reverb One, ReVibe, RTAS, Sibelius, Smack!, SoundReplacer, Sound Designer II, Strike, Structure, SYNC HD, SYNC I/O, Synchronic, TL Space, Transfuser, Velvet, X-Form, XMON, and Xpand!are trademarks or registered trademarks of Digidesign and/or Avid Technology, Inc. [. . . ] Rectified When selected, audio waveforms are displayed so that their positive and negative waveform excursions (the portions that fall above and below the center line) are summed together and viewed as a single positive-value signal. This view allows more waveform detail to be seen in either normal or reduced track height views. It can be particularly useful when editing volume automation data, since it depicts waveform levels as starting at the bottom of the track. Rectified Waveform view is an option that can be enabled in Peak or Power views. Outline When selected, audio waveforms are outlined. Sends A­E These options display either send assignments for all sends, or the controls for individual sends (Sends A­E). Select Assignment to display all five of these send assignments. Transport These options selectively display Counters, MIDI Controls, Synchronization, and Expanded controls in the Transport window. 12 Essential Menus Guide Chapter 6: Track Menu Track menu commands are used to create, manage, and edit tracks. Delete This command removes selected tracks from a session. While audio or MIDI region data will remain in the Region List, the track and its arrangement of the regions on the deleted track (the track's playlist) will be lost. Group Track Menu This command is available when you purchase Pro Tools M-Powered. You can read more about this command on-screen by selecting this menu command. Be sure that the Help menu item Display M-Powered Information Dialogs is enabled (select that item so that a checkmark appears next to it in the Help menu). New Track The New Track command lets you add one or more new audio tracks, Auxiliary Inputs, Master Faders, MIDI or Instrument tracks to a session. Audio tracks, Auxiliary Inputs, and Master faders can be mono or stereo. Clear All Clip Indicators This command clears all clip indication from all meters. Create Click Track New Track dialog Make Inactive or Make Active This command is available when you purchase Pro Tools M-Powered. You can read more about this command on-screen by selecting this menu command. Be sure that the Help menu item Display M-Powered Information Dialogs is enabled (select that item so that a checkmark appears next to it in the Help menu). This command lets you create one or more click tracks. Click tracks are Auxiliary Input tracks with the Click plug-in already inserted. Chapter 6: Track Menu 13 14 Essential Menus Guide Chapter 7: Region Menu Region menu commands are used to manage and edit regions. Loop The Loop command lets you loop audio, video, and MIDI regions so they repeat again and again while Pro Tools is in action playing back. Selecting one or more regions and choosing Region > Loop displays the Loop dialog, where you can specify how long you want the selection to loop. Similar to (but more flexible than) the Edit > Duplicate command, the Loop dialog automates all the copy/paste involved in Unloop The Unloop command lets you switch looped regions back to standard (unlooped) regions so that they can be edited individually. Region Menu Edit Lock/Unlock Region This command is available when you purchase Pro Tools M-Powered. You can read more about this command on-screen by selecting this menu command. Be sure that the Help menu item Display M-Powered Information Dialogs is enabled (select that item so that a checkmark appears next to it in the Help menu). Rename This command lets you rename the selected region. When renaming a region that was auto-created during editing, the region becomes a user-defined region and is displayed in the Region List even when auto-created regions are hidden. Quantize to Grid Group This command is available when you purchase Pro Tools M-Powered. You can read more about this command on-screen by selecting this menu command. Be sure that the Help menu item Display M-Powered Information Dialogs is enabled (select that item so that a checkmark appears next to it in the Help menu). This command adjusts the placement of a selected audio or MIDI region in a track so that its start point (or Sync Point, if it contains one) precisely aligns to the nearest Grid boundary. Grid units are chosen from the Grid pop-up menu in the Edit window. Elastic Properties This command is available when you purchase Pro Tools M-Powered. [. . . ] Floating windows (such as plug-in, output, and send windows) and the Transport window are not affected by these commands. Tile Horizontal Arranges all open windows in a horizontally-tiled pattern on the screen. Tile Vertical Arranges all open windows in a vertically-tiled pattern, side by side, on the screen. Cascade Arranges all open windows in a cascading pattern on the screen. Window Menu For Window menu items, keyboard shortcuts with number keys only work using the numeric keypad on your computer. Close Window Closes the currently targeted window. Configurations The Configurations menu provides commands and options to manage the configuration of windows in your session, as well as the internal window configurations of the Edit, Mix, Transport, MIDI Editor, and Score Editor windows. Mix This command displays the Mix window, used for recording and mixing tasks. Edit New Configuration This command is available when you purchase Pro Tools M-Powered. [. . . ]