User manual LG W2043SE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LG W2043SE. We hope that this LG W2043SE user guide will be useful to you.
You may also download the following manuals related to this product:
LG W2043SE (1813 ko)
LG W2043SE (3676 ko)
LG W2043SE (3060 ko)
LG W2043SE (1835 ko)
LG W2043SE (1824 ko)
LG W2043SE (3015 ko)
LG W2043SE (1820 ko)
LG W2043SE (1796 ko)
LG W2043SE (1832 ko)
LG W2043SE (1820 ko)
LG W2043SE (1806 ko)
LG W2043SE (1824 ko)
LG W2043SE (1837 ko)
LG W2043SE ANNEXE 890 (3028 ko)
LG W2043SE CARACTERISTIQUES TECHNIQUES (2610 ko)
LG W2043SE (2594 ko)
LG W2043SE (3013 ko)
LG W2043SE CARACTERISTIQUES TECHNIQUES (2597 ko)
Manual abstract: user guide LG W2043SE
Detailed instructions for use are in the User's Guide.
[. . . ] User's Guide
W1943SB W1943TB W2243S W2243T
Make sure to read the Important Precautions before using the
product. Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to
your dealer when you ask for service.
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. [. . . ] When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.
8
Connecting the Display Connecting with the PC
W1943SB/W2243S
1. Before setting up the monitor, ensure that the power to the monitor, the computer 2. Connect signal input cable 1
system, and other attached devices is turned off. and power cord of the signal cable.
A Connect D-sub(Analog signal) Cable
2
in order, then tighten the screw
NOTE
This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown.
When using a D-Sub signal input cable connector for Macintosh
Mac adapter : For older Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.
Varies according to model.
Wall-outlet type
A
PC
3. When monitor power is
turned on, the 'Self Image Setting Function' is executed automatically.
Power Button
NOTE
` Self Image Setting Function'?This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.
9
Control Panel Functions Front Panel Controls
W1943TB/W2243T
1
2
3
4
5
W1943SB/W2243S
1
2
3
4
5
Button
Use this button to enter 4:3 IN WIDE, PHOTO EFFECT menus. For more information, refer to page 14.
MENU Button
Use this button to enter or exit the On Screen Display.
OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.
10
Control Panel Functions
Buttons
Use these buttons to select or adjust functions in the On Screen Display.
Use this function to select optimal image conditions in accordance with the surrounding environment (Brightness, Image type). For more information, refer to page 15.
(SOURCE Hot key)
When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. (Only W1943TB/W2243T )
AUTO/SET Button
Use this button to enter a selection in the On Screen Display. AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). button on
MENU : Exit : Move SET : Select
Main menu
4:3 IN WIDE
Description
To select the image size of the screen.
WIDE
4:3
· WIDE · 4:3
: Switch to full screen mode according to input image signal. : Change the input image signal ratio to 4:3.
PHOTO EFFECT
To select the color effects of the screen. · GAUSSIAN BLUR
Use the AUTO/SET button to go to sub-menu.
This menu changes the screen to be more colorful and smoother. · SEPIA This menu changes the screen to be Sepia tone (brown color). · MONOCHROME This menu changed the screen to be Gray scale(black-and-white Picture) .
NORMAL
GAUSSIAN BLUR
SEPIA
MONOCHROME
14
On Screen Display(OSD) Selection and Adjustment
The following OSD screen will appear when you press the button on the front of the monitor. This feature lets you easily select the best desired image condition optimized to the environment (ambient illumination, image types etc).
Menu Name Icons Sub-menu Name MENU : Save & Exit , : Move
F-ENGINE
When the F-ENGINE is executed, the screen is split to show the effects of the selected function. The active state is to the left and the inactive state is to the right side of the screen. Select the function you want and press the [MENU] button to save the setting.
Active state
Inactive state
Main menu
Sub menu
MOVIE
Description
For moving images in videos or movies.
INTERNET For text images (Word processing etc. ).
USER
USER You can manually adjust ACE or RCM. You can save or restore the adjusted value even when using a different condition. [. . . ] In this case, please ask to the computer or the video card manufacturer.
21
Troubleshooting
Display image is incorrect
G The screen color is mono or abnormal. · Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. · Set the color setting higher than 24 bits (true color) at Control Panel - Settings.
G The screen blinks.
· Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
G Have you installed the display driver?· Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LG W2043SE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LG W2043SE will begin.