User manual KRUPS XN9108

[. . . ] EN CAUTION: Before operating your coffee machine, please refer to the safety instructions leaflet to avoid possible harm and damage. Press the button, plug and hold the button Launch the App on your smartphone or tablet Follow the instructions via the App Turn on your machine Turn on your machine Fill the water tank with fresh potable water i NOTE: water may accumulate inside the machine's head, please dry visible parts with a clean dry cloth. [. . . ] If you are cleaning, descaling or emptying the system, check that no capsule is inserted then close, lock the machine and push the button to start one of these operations. If coffee is flowing normally, this indicates the machine is working properly. If only water is flowing, the machine is executing a user request for either cleaning, descaling or emptying the system. Turn the machine to "OFF mode" by pushing the button for 3 seconds and then push it again to turn the machine ON. Now wait approximately 20 minutes to allow the machine to cool down after extensive use. It will take some time before the coffee flow comes out (due to barcode Reading and pre-wetting the coffee). Check that a fresh capsule is inserted in correct position, that the handle is properly locked and push the button to start. Turn the machine to "OFF mode" by pushing the button for 3 seconds and then push it again to turn the machine ON. Now wait approximately 20 minutes to allow the machine to cool down after extensive use. During regular Coffee/Espresso preparation: 1) Unlock the handle and Open the machine head to check that a fresh undamaged capsule is During Descaling, Emptying and Cleaning: 1) Check that capsule is ejected. During Programming Volume: 1) Check if a capsule has been well inserted. Disconnect powercord from the outlet and plug the machine back into outlet after 10 seconds. [. . . ] For at læse mere om Nespressos strategi for bæredygtighed, kan du besøge www. For mer informasjon om Nespresso sin strategi for bærekraft, gå til www. [. . . ]