User manual KRUPS XN6018

[. . . ] First Use (or after a long period of non-use)/Première utilisation (ou après une longue période de non-utilisation) 15 Settings mode: Emptying the System before a period of non-use or for frost protection/ Nespresso is an exclusive system creating the ultimate Espresso, time after time. All Nespresso machines are equipped with a unique extraction system that guarantees up to 19 bar pressure. Each parameter has been calculated with great precision to ensure that all the aromas from each capsule can be extracted, to give the coffee body and create an exceptionally thick and smooth crema. CAUTION: when you see this sign, please refer to the safety precautions to avoid possible harm and damage. [. . . ] If process doesn't start at first attempt and maintenance light steady ON, press brewing button again. If process doesn't start at first attempt and maintenance light steady ON, press brewing button again. Turn the machine OFF by turning the temperature dial anti clockwise until it reaches 0 temperature. During heat up, you can select any coffee preparations and press the brewing button. Recipe glass, slide the cup support across the metalic base of the machine. To ensure hygienic conditions, it is highly recommended to change the water after a long period of non-use and to not reuse a used capsule. The highest temperature setting is very hot, we recommend to use a cup with a handle. ristretto (25 ml) Espresso (40 ml) Lungo (110 ml) Americano (25 ml coffee; 125 ml hot water) Hot water (200 ml) To select your recipe, turn the beverage dial until the desired beverage. To manually top up your beverage, press the brewing button within 10 seconds from the end of preparation. For water top-up you may add manually by selecting the water icon on the beverage button. To stop the coffee flow, press the brewing Button or slightly move the slider towards the right of the machine. To change the selected cup size during brewing select the new desired coffee button. the machine Will immediately stop if the coffee volume extracted is larger than new desired coffee size. TIP: For optimal milk froth, use whole or semi skimmed milk at refrigerated temperature (about 4-6 °C). To guarantee hygiene conditions, use heat treated milk (pasteurized), refrigerated & freshly opened only. Select Americano recipe and press and hold brewing button until desired coffee volume is reached. Press and hold again and keep pressed until desired water volume is reached. Never immerse the appliance or part of it in water or any other liquid. To ensure hygienic conditions, it is highly recommended to empty and clean the used capsule container and drip tray every day. Them all with a damp cloth and with odorless detergent and rinse with warm/hot water. Dry all water tank container parts with a Fresh and clean towel, cloth or paper and reassemble all parts. Clean the surface of the Machine, including under the metallic grid, with a damp cloth and odorless detergent. [. . . ] Then plug again - When maintenance light blinks every 4 seconds, descaling is required. - Please wait for all buttons to switch off, this will take a few minutes. Water or coffee flow does not stop even when pushing the brewing button. No coffee flow, water goes directly into the drip tray (despite inserted capsule). [. . . ]