User manual KORG PA80

[. . . ] Disable any SysEx filters on the MIDI IN (see “Page 10 - MIDI IN Filters” on page 14-5) 2. Disable any SysEx filters on the MIDI OUT (see “Page 12 - MIDI OUT Filters” on page 14-5) 3. Select the right TO HOST rate for your computer (see “To Host rate” on page 14-4). [. . . ] Set the Serial Port setting to the serial port that is connected to the PA80 [COM1]~[COM4]. If you wish to use the serial port for another purpose after installing the KORG MIDI Driver, either delete the driver or select [None] to defeat the driver. When the PA80 is connected, [Independent Synth/ MIDI Out] is not used, so do not check this item. [MIDI Out Messages] allows you to select the messages that will be transmitted to the PA80. When you have finished making your selections, click the [OK] button. If installation has been performed correctly, the KORG MIDI Driver icon will appear in the PatchBay window when PatchBay is started up, as shown below. (The Modem/Printer port displays may be different, depending on your setup. ) INSTALLING THE KORG MIDI DRIVER INTO THE MACINTOSH Note: In order to use the KORG MIDI Driver, Apple MIDI Manager and PatchBay must already be installed. Use the Apple MIDI Manager and PatchBay that are included with the MIDI application that you are using. When the KORG MIDI Driver is used, the “Modem MIDI Out/Port settings” dialog box allows you to specify the MIDI channels and types of messages that will be sent to the PA80. If you do not require this function, you can simply use the Apple MIDI Driver without using the KORG MIDI Driver. When using the Apple MIDI Driver or when using a MIDI application (sequencer) which does not use the Apple MIDI Driver, refer to page 4. Copy the KORG MIDI Driver from the disk included with the AG-002B into the system folder of the startup drive. Check Port Enabled for the port to which the PA80 is connected, and select [1 MHz] as the Interface Type. (Since the PA80 does not contain a KORG PC IF, do not select [KORG PC IF]. Here you can select the MIDI channels/messages that will be output to each port. If the system folder contains the Apple MIDI Driver, either delete it or move it to another folder. Note: The KORG MIDI Driver includes the functions of the Apple MIDI Driver. [. . . ] Now select a MIDI application (sequencer) that can use SMF data, and that software will be able to open SMF song files. From the [Document type] popup menu choose [MIDI] and click the [OK] button. The item added to the PC Exchange™ window will be displayed, and has been registered. [. . . ]