User manual KORG MR2

[. . . ] MR-2 System Version Ver. 1. 1. 0 Release Information Changes in ver. 1. 1. 0 from ver. 1. 0. 4 - The maximum speed of the fast forward and fast reverse function has been improved. You can easily and quickly change the current playback position of the song. [. . . ] - DSDIFF Dual Mono files that have been recorded on the MR-2 could not be read on the MR-2000S. This has now been fixed If the MR-2's system software version is 1. 0. 4 or earlier, DSDIFF Dual Mono files that are re-exported by AudioGate can be read on a MR-2000S. -A minor bug has been fixed pertaining to project files being removed when sorting alphabetically on the library select screen. Additional minor operational enhancements have also been applied. Changes in ver. 1. 0. 4 from ver. 1. 0. 3 Some USB communication errors such as very slow speeds or data interruptions might have occurred. This has now been fixed. MR-2 System Version Ver. 1. 1. 0 Release Information Changes in ver. 1. 0. 3 from ver. 1. 0. 2 When selecting a “New Project Type”, the “REC FORMAT” option will now default to “DSDIFF” after a “Factory Reset” has been performed. Updating the software You’ll need a memory card (SD/SDHC), a card reader, and a computer that you’ll use to write the system data to the card. Unzip the downloaded file and you will find the “MR2SYS. BIN”file in the “MRSYSTEM”folder. Then, copy the file to the root directory of your memory card. note1: You may be able to use USB-MODE on the MR-2 for this purpose, but we recommend using a card reader because a USB communication error may occur with systems older than ver. 1. 0. 4. 2. Use the USB bus to power the recorder during this update procedure. note2: If a power failure or similar accident occurs while loading the system, the MR‐2 may become inoperable. Press the menu button, and in the menu list (MENU) screen, use the controller buttons to select and confirm “SYSTEM. ” The system setting (SYSTEM) screen will appear. Use the controller buttons to select and confirm “SoftwareUpdate. ” A dialog message of “Upgrading the system. Use the controller buttons to select and confirm “Yes. ” The screen will indicate “SoftwareUpdate: Working. . . ” and the system will be loaded. [. . . ] In the menu list (MENU) screen, use the controller buttons to scroll MR-2 System Version Ver. 1. 1. 0 Release Information down to select and confirm “SYSTEM. ” The system settings (SYSTEM) screen will appear. Use the controller buttons to select and confirm “Device Info”. [. . . ]