User manual KORG LEGACY EASY START GUIDE

[. . . ] After making audio and AC connections, connect your guitar to the INPUT jack on the back panel. On the top panel, lower the VOLUME level and turn on the power by plugging the optional DC 4. 5V adaptor into an AC outlet. [. . . ] On the top panel, lower the VOLUME level and turn on the power by plugging the optional DC 4. 5V adaptor into an AC outlet. If using batteries, the power will turn on when a mono cable is plugged into the INPUT jack. When connections are complete, turn on the power of the mixer or amp and adjust the volume appropriately. Ampworks Guitar/Bass EasyStart Selecting and Listening to Ampwork’s 11 Preset Programs: 1. Press the PRESET button on the front panel; the LED will light above the button. Turn the AMP TYPE selector, an appropriate cabinet and effect will automatically be added to the amp model. If you like, you can also try different cabinet and effect models with the amp models by simply turning the selector knob. Listening to Programs- PROG1, PROG2, and Manual: 1. Note: Noise that might have previously been present (due to high gain or single coil hum) should now be gone. Make adjustments as necessary. Using the “Tap” button: The “Tap” button on Ampworks allows you to easily adjust certain effect parameters such as delay time, modulation speed and reverb length. To set the delay time, tap the “Tap” button to a desired tempo. Note: This is very useful for setting a delay repeat in time with your song’s tempo. To set the speed of a modulation effect and reverb length, use the same procedure. This means that if Flanger is selected (which has a proportion to tap interval of x2, ) if you tap at a 4 second interval, Ampworks will set the parameter value (flanger speed) to twice that length, or 8 seconds. You can also adjust the amount of effect level by turning the “Eff. [. . . ] This means that if Flanger is selected (which has a proportion to tap interval of x2, ) if you tap at a 4 second interval, Ampworks will set the parameter value (flanger speed) to twice that length, or 8 seconds. You can also adjust the amount of effect level by turning the “Eff. [. . . ]