User manual KORG KAOSS PAD QUAD

[. . . ] Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Unauthorized changes or modification to this system can void the user’s authority to operate this equipment. THE FCC REGULATION WARNING (for USA) Care If the exterior becomes dirty, wipe it with a clean, dry cloth. do not use liquid cleaners such as benzene or thinner , or cleaning compounds or flammable polishes. [. . . ] Careless operation can damage your speaker system or cause other issues. If you are not using a mic, turn the MIC VOLUME knob all the way down. TIP When you are using the KAOSS PAD QUAD as an external effects unit, the return level may be lower than expected. Connect the KAOSS PAD QUAD to your other equipment as shown in the diagrams on the preceding pages, and connect the AC adapter to an electrical outlet. Never use any AC adapter other than the one that’s included. TIP The initial factory setting is “Ena” for the Auto Power Off function. Adjust the level as high as possible without making the peak indicator light up red when audio is input from the connected equipment. If you are using the mic jack, adjust the MIC VOLUME knob as appropriate for the sensitivity of the mic, so that the sound is not distorted. If you are listening through headphones, use the PHONES VOLUME knob to adjust the headphone level. TIP The PHONES VOLUME knob does not affect the level at the LINE OUT jack. To turn the KAOSS PAD QUAD off, press and hold down the Power button until the display indicators turn off. Auto Power Off The KAOSS PAD QUAD features an Auto Power Off function, which turns the unit off automatically if the unit is left unused for approximately four hours. selecting an effect The KAOSS PAD QUAD features four effect modules (1–4). Touching the touch pad will cause all selected effects to be applied to the sound. You can also continue applying the effects by pressing the FREEZE button. 7)” TIP Effects are applied in ascending order of the effect modules (1 to 4). Disabling the Auto Power Off function Follow the steps below to disable the Auto Power Off function. Turn the KAOSS PAD QUAD on while pressing and holding down the 1DELAY button. Rotate the BPM knob to select “dis” on the display. To enable the Auto Power Off function, turn the KAOSS PAD QUAD on while pressing and holding down the 1DELAY button. Rotate the BPM knob to select “Ena” on the display, then press the TAP button. The Effect Type button indicator will go dark and the corresponding effect turns off. [. . . ] Filter category LPF This filter cuts the treble and boosts the bass. BPF+ This filter emphasizes a certain band based on the current touch pad position. jET This filter creates an effect of the high swishing whine of a jet plane. Operating temperature Included items 0–+40 ˚C (non-condensing) AC adapter, protective sheet for touch pad * Specifications and appearance are subject to change without notice for improvement. [. . . ]