User manual KORG AX5G

[. . . ] MASTER EFFECT/AUX ­ In this mode you select an effect for both Master effect 1 and 2 from one of 32 available Master effects and set the return levels and balance. You can also edit the effect parameters by selecting the effect name button with the CURSOR / [ENTER] keys. By pressing the MASTER EFFECT/AUX key repeatedly to access the "EffSnd1" and "EffSnd2" tabs, you can set individual send levels for each of the 12 tracks. You can also access the external Aux send ("AuxSend" tab) amount and Final effects ("FinalEff" tab) in this mode. [. . . ] Pressing the [ ] FF key while in the scrub mode will play the audio back at half speed, one octave lower than the original pitch. TEMPO/RHYTHM ­ Here you can set song tempo, create a tempo map, record your own tempo track, set time signature and select rhythm patterns from any of the 96 metronome and 215 PCM-based drum patterns. TRACK - In this mode you can access the Virtual Tracks settings, perform track-editing functions (copy, reverse, normalize, etc. ) and also import and export . audio data from the clipboard. 2 AX5G EasyStart Navigating the AX5G To select the display "tabs" in each mode, repeatedly press a mode key: [INPUT/TUNER], [EQ/PHASE] etc. To move to different locations in the display, use the four-position CURSOR. To confirm a highlighted selection in the display, press the [ENTER] key. To change a highlighted value, rotate the DIAL. Getting started: Listening to the demo songs: 1. 2. After connecting the AC power cable, press the [POWER] key (red) on the top panel. Press the [SONG/CD] key repeatedly, until the "SelSong" tab is selected in the display Use the DIAL to select songs, and press the [ ] PLAY key to begin song playback When finished listening, press the [ ] STOP key. Creating a new song: 3. Select the "New" button in the display using the CURSOR and [ENTER] keys select the "Song Type" as "16Bit/12Track" and the "Mixer Set" as "New" press "OK". The display will indicate "NEW SONG" in the next available empty song location. You can rename your song by selecting the "Rename" button in the display. ! The Transport Keys: [ ] = RECORD [ ] = PLAY [ ] = STOP [ ] = REWIND [ ] = FAST FORWARD Assigning inputs and recording audio tracks: 4. Press the [MASTER EFFECT / AUX] key again to access the "MstEff2" tab and use the DIAL to select an effect for Master Effect 2. To edit the parameter for either effect, select the "effect name button" in the display (ex. RV1:ReverbHall ) and then select the "icon" in the display to access edit parameters. To apply master effects to a track, press the [MASTER EFFECT / AUX] key again to access the "EffSnd1" tab (for Master Effect 1) or "EffSnd2" tab (for Master Effect 2) in the display Use the CURSOR and [ENTER] keys and DIAL to increase the send level for each track you want to add master effects to. Using the Final Effects: 1. 2. Press the [MASTER EFFECT/AUX] key until you access the "FinalEff" tab. To edit any parameters of the Final Effect, select the "effect name button" in the display (ex. DY1:St. Comp ) and then select the "icon" in the display to access the edit parameters. Working with Scenes 1. Press the [SCENE] key to enter Scene mode. If you have not stored any Scene memory locations yet, press the [STORE] key and then press the [SCENE] key. This will store a "snapshot" of your mixer settings for this song at the COUNTER location indicated on the SONG/ CD page. After pressing the [SCENE] key, to enable Scene Memory, select SceneRead:Off in the display using the CURSOR and [ENTER] keys to set the display to read SceneRead:On. 4 2. AX5G EasyStart To store additional scenes, start song playback and change mixer settings, then press the [STORE] key, followed by pressing the [SCENE] key again. [. . . ] To adjust Virtual Track settings for tracks 7-12, press the [TRACK] key again to access the "Vtr7-12" tab in the display. To use the "EditTrk" function, you must first select a range of the song to be edited by storing an IN, OUT and TO location (some editing functions also require an END location). To do this, move to the desired song location, and then press the [STORE] key followed by the LOCATE key for each location. Once you've set locate points, you can edit the specific region in the track(s). [. . . ]