User manual KENWOOD KRC-708

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KENWOOD KRC-708. We hope that this KENWOOD KRC-708 user guide will be useful to you.


KENWOOD KRC-708 : Download the complete user guide (803 Ko)

Manual abstract: user guide KENWOOD KRC-708

Detailed instructions for use are in the User's Guide.

[. . . ] · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. · Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid crystal fluid may be dangerous to your health or even fatal. [. . . ] When the last disc in the changer has finished, the player returns to the first disc and starts playing it. · Disc #10 is displayed as "0". · You can give names to discs through the presetting disc name function (page 24). · If you try to display the name of a disc that does not have one, "NO NAME" is displayed instead. · When there is an attempt to display the title of a disc for which the disc title/track title has not been recorded, "NO TEXT" is displayed for CD and "NO TITLE/NO NAME" is displayed for MD. · If you attempt to display disc title/track title when connecting the CD changer not supported for CD text feature, caution messages such as "NO TEXT" or "Reading" may be displayed. · Depending on the type of characters of the CD Text, some characters may not be displayable. Switching Display for Discs Switch the display that appears whilst discs are playing. Switching Display for Discs: Each time you press the DISP button, the display during disc play switches as follows: -- 21 -- External disc control features English Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play: Hold down on the ¢ button. Release your finger to play the disc at the point. NOTE NOTE (For disc changers) You cannot make a forward track search when listening to the last track on a disc. Disc Search Search forwards or backwards through the discs in a disc changer until you reach the one that you want to listen to. Making a Reverse Disc Search: Press the AM button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. Making a Forward Disc Search: Press the FM button to display the desired disc number. · The time needed for random selection depends on the number of discs loaded in the disc magazine. 1 Play the disc whose name you want to preset. NOTE Text / Title Scroll This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu. To scroll manually: 1 Press the DISP button to display the disc title or the track title. · This function is not available for disc changers that do not feature the Disc Name Preset function. · The Disc Name Preset function cannot be used during the Magazine random play as well as whilst a disc title or track title is displayed. 2 Hold down the NAME. S button for two seconds or more. "NAME SET" is displayed and the disc name preset mode is entered. The cursor blinks in the position where character input can be made. 2 Holding down the DISP button for one second or more results in one scrolling display of the titles. To scroll automatically: 1 Press the DISP button to display the disc title or the track title. The titles will be displayed in one scrolling display. NOTE 3 Press either the 4 or ¢ button to move the cursor to the desired position. The 4 button moves the cursor to the left, and the ¢ button to the right. 4 Each time the 38 button is pressed, the characters to be entered change as listed below. Press the FM or AM button to display the desired character. -- 24 -- Menu settings Characters that can be displayed are as follows. Alphabet (upper case): A ~ Z Alphabet (lower case): a ~ z (KDC-__ Only) Numerals and symbols: 0~9 @ " ` ` % & +-=, . /\<>[] LOUD B NR SCAN B. S/RDM REP MTL/M. RDM TI VOL ADJ DISP NAME. S PROG /PTY PWR OFF 38 FM MENU AUD Special characters: á à é è í ì ó ò ú ù Ñ Ç ® ß < fl â ä ê ëîïôöûüñç©Æ>fi (KDC-__ Only) 5 Continue steps 3 and 4 until all the characters are chosen for the name. # 1-6 DISP 4 AM ¢ 6 Press the NAME. S button. The disc name is stored and the disc name preset mode is cancelled. If you make no entry in a 10-second period, the name will be stored with the characters input so far. NOTE KRC-708 Menu display · The number of characters and discs whose names can be stored will differ depending on the disc changer that is connected. [. . . ] The speakers are not wired correctly. Clean the tape head, referring to the section on "Cleaning the tape head" (see page 4). Reconnect the speaker cables so that each output terminal is connected to a different speaker. The tape can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. Can't remove tape. The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. -- 39 -- Troubleshooting Guide External disc control mode PROBLEM The disc control mode cannot be selected. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KENWOOD KRC-708




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENWOOD KRC-708 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.