User manual JVC KD-AVX44

[. . . ] English: Hereby, JVC, declares that this KD-AVX44 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. Information for Users on Disposal of Old Equipment This symbol indicates that the product with this symbol should not be disposed as general household waste at its end-of-life. [. . . ] You can use the following buttons on the remote controller to operate the CD changer. Manual Search: Hold either or until "Manual Search" appears on the display, then touch it repeatedly. * The TEXT indicator lights up while tuning in to an ensemble that supports Dynamic Label Segment (DLS). When surrounding sounds are noisy Some services provide Dynamic Range Control (DRC) signals together with their regular programme signals. The DRC indicator will light up while tuning in a service with the DRC signals. Preset List can also be accessed through <AV Menu> = <List>. Preset List can also be accessed through <AV Menu> = <List>. Announcement Standby Reception allows the unit to switch temporarily to your favorite service (announcement type). announcement Standby Reception Enter <AV Menu> = <Mode> = <Announce Standby> ( below and page 61). The unit will temporarily switch to your favorite service from any source other than FM/AM. While receiving a DAB service: When driving in an area where a service cannot be received, this unit automatically tunes in to another ensemble or FM RDS station broadcasting the same programme. While receiving an FM RDS station: When driving in an area where a DAB service is broadcasting the same programme as the FM RDS station, this unit automatically tunes in to the DAB service. When shipped from the factory, Alternative Frequency Reception is activated. Listening to other external components When you connect a Navigation System to the unit, you can view the navigation screen regardless of the source. preparation: Make sure <AV Input> setting is selected for <Navigation>. When you do not connect the Navigation System but connect an audio component to LINE IN plugs, you can use "AV Input" for listening to the audio source. You can connect an external component to the CD changer jack on the rear using the Line Input Adapter--KS-U57 (not supplied) or AUX Input Adapter--KS-U58 (not supplied). You can store your adjustments into <User1>, <User2>, and <User3>. You can select one of the following sound modes: <Flat>, <Hard Rock>, <R&B>, <Pop>, <Jazz>, <Dance>, <Country>, <Reggae>, <Classic>, <User1>, <User2>, or <User3> · 1 Select a character, then move the entering position. The display indications may change according to change of the specifications. Holding DISP (on the unit) scrolls the information regardless of this setting. ­15 (darkest) to +15 (brightest); Initial 00 You can adjust the following to make the monitor clear and legible for watching the playback picture. [. . . ] Plays all versions of DivX® video (including DivX® 6) with enhanced playback of DivX® media files and the DivX® Media Format · Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. When any language other than <cc> is selected for <Language>. Language codes (for DVD/DivX language selection) What appears to be trouble is not always serious. ( page 57) Once you have reset the unit, make sure to activate the speaker again. [. . . ]