User manual JENSEN VOYAGER MRF27RTL QUICK REFERENCE

[. . . ] When the desired option appears in the display, rotate the volume control knob (1) to adjust that audio feature. When no adjustments have been made for three seconds, the unit will resume normal operation. 5. Auxiliary Input Function Press AUX (5) to directly access auxiliary input mode from any other function mode when portable audio device is connected to the unit. To connect a portable audio device, insert a standard 3. 5 mm (audio line output or headphone output from your portable CD / MP3 / iPod or other media player) into an "AUX IN" jack on the front or rear of the unit. [. . . ] can be connected to the front panel A/V input with a separately purchased 3. 5mm A/V cable adapter. Connect the device to the A/ input on the front panel, and press AUX to engage the input circuit. Please note that there are several A/V cable "standards" which differ from each other. The AWM960 is designed to support the Apple Video iPodJ cable type, as shown in the inset drawing. AUX A/V IN Left Audio Right Audio Ground Video 3. 5 mm A/V Cable (not included) 6. Time/Frequency Display Press T/F (6) momentarily to display the time while in Tuner, CD, DVD or auxiliary input mode. 7. Press T/F again briefly, and the number representing the minutes will flash. The new time will be saved five seconds after the last adjustment is made. 8. Setting the Alarm To set the alarm to a specific time, press ALARM SET (8a), and the alarm time will appear in the display with the number representing the hours flashing. Press ALARM SET again, and the number representing the minutes will flash. Once a time is set, press ALARM ON/OFF (8b) to turn the alarm function on or off. 9. Speaker Output The three speaker output buttons (9) (SPEAKER A, SPEAKER B and SPEAKER C) control speaker output from the radio. Stop Press STOP (20) to suspend disc play, and "STOP" will appear in the display. Menu Press MENU (21) to return to the root menu while in DVD mode. 22. Enter While in menu mode, press ENTER (22) to select a menu option. 23. Language While playing a DVD, press LANG (23) to select the audio language. 10 AWM960 DVD Operation (continued) The included remote control operations many functions of the unit, including DVD functions. The following buttons on the remote correspond with buttons on the front panel of the radio to control basic, tuner and CD functions in the same manner as described in those sections: Remote Control Basic, Tuner & CD Functions Power (24) Menu (25) Mute (26) or Loud (hold for one second) Eject (27) TUNE+ 24 25 26 LOUD 27 38 MENU Tune + and Tune - (28) VOL and VOL (29) 28 TUNEENTER 30 31 Fast Forward and Fast Reverse (30) T/F (31) Stop (32) Play/Pause (33) Language (34) Repeat (35) Source (36) Audio (37) Enter (38) VOL 29 VOL T/F 32 RPT TITLE 34 35 PROG LANG 33 36 1 4 7 2 5 8 3 6 9 AUD SOURCE ZOOM ANGLE +10 0/10 . . . . GOTO 37 JENSEN 11 39. Numeric Buttons To directly access a track, press the corresponding numeric button (1-9) (39). To access a track with a number of 10 or greater, press 10+, then the other numbers. Directional Arrows While in the DVD menu, press any of the four directional arrows (40) to move the cursor to the desired menu item. Press ENTER (either on the radio or the remote) to confirm the highlighted selection. 41. Title Press TITLE (41) during DVD play to enter the title menu, then use the directional arrows and play button to select and play the desired title. Zoom Press ZOOM (42) during DVD play to zoom the picture, or press ZOOM repeatedly to change the magnification level. MENU LOUD TUNE+ 43. [. . . ] Angle Press ANGLE (43) to select different visual angles if stored on the disc. TUNEENTER 40 44. Go To Press GOTO (44) during disc play to select time, track or chapter. VOL VOL T/F 45. Setup Press the setup button (45) to enter the setup menu. PROG LANG RPT TITLE 41 46. Subtitle Press the subtitle button (46) to select subtitles. 1 4 2 5 8 3 6 9 AUD SOURCE 47. [. . . ]