User manual JANE CROSS REVERSE

[. . . ] WARNING: It is important to make sure that the child is kept away from the pushchair while it is being folded or unfolded. The appearance of cutting, compression and pinch points are inevitable during these operations. WARNING: Never leave the child in the pushchair when going up or down stairs or when travelling in any mode of transport. [. . . ] - SWIVEL WHEELS Your CROSS REVERSE has front swivel wheels that can be steered or the steering can be locked. To lock it press the button and once the wheels are aligned with the longitudinal axle of the pushchair they will automatically lock. Use it as a parking brake whenever you can, it is an important safety element. B To adjust the brake: If you need a more precise adjustment follow the indications in figure. It may be necessary to push the pushchair slightly for the brake to be fully activated. - SEAT BELT Your CROSS REVERSE has a safety harness so that your child is always safe. - ADJUSTING THE FOOTREST The position of the footrest can also be adjusted to suit the child's position. Press button A situated on the footboard on both sides of the pushchair while you move the footrest downwards. 12 To move it upwards you don't need to press the button as it has a free movement mechanism. - SAFETY LIGHTS It is possible to activate the safety lights on your CROSS REVERSE so you can be seen in poor visibility conditions. 10 There are 3 types of light sequences programmed to be activated each time you press the button. - ADJUSTING THE BACKREST The backrest of the CROSS REVERSE can be reclined to make the child more comfortable. 11 To raise it there is no need to press the lever, simply push the backrest as it is fitted with a free movement mechanism. - PROTECTOR To get the protector out, press the button situated on the lower part of the armrest. [. . . ] WARNING: The appearance of cutting, compression and pinch points are inevitable during these operations. To take the rear wheels off hold the button on the axle down and pull the wheel. Fit the rear wheels onto the chassis, pressing the central button on the wheel. [. . . ]