User manual INDESIT D 66T1 A NX EU

[. . . ] General safety Disposal Saving energy and respecting the environment Assistance installation , 5-6 Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data Starting the dishwasher Measuring out the detergent Measuring out the rinse aid Measuring out the refined salt care and maintenance , 13 Shutting off the water and electricity supplies Cleaning the dishwasher Preventing unpleasant odours Cleaning the sprayer arms Cleaning the water inlet filter Cleaning the filters Leaving the machine unused for extended periods Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) A+ Energy consumption per year in kWh (2) Energy consumption of the standard cleaning cycle in kWh Power consumption of the off-mode in W Power consumption of the left-on mode in W Drying efficacy class on a scale from G (low efficacy) to A (high efficacy) The duration of the left-on mode in minutes 1) The information on the label and fiche relates to the standard cleaning cycle, this programme is suitable to clean normally soiled tableware and it is the most efficient programme in terms of combined energy and water consumption. 2) Based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes. This appliance was designed and manufactured in compliance with international Keep detergent and rinse aid out of reach of Safety standards The following information has Been provided for safety reasons and should · The packaging material should not be used as Therefore be read carefully. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine. [. . . ] Collect glasses and cutlery from the dishwasher as soon as Before loading the tray, make sure the supports are properly coupled to the upper rack (see Figure). A good wash result also depends on the correct amount of detergent being used. Amount does not result in a more effective wash and increases environmental pollution. Select the wash cycle in accordance with the type of crockery and its soil level (see Table of wash cycles) by pressing the P button. Based on how soiled the items are, the amount can be adjusted to individual cases using powder or liquid detergent. In the case of normally soiled items, use approximately Start the wash cycle by shutting the door. The end of the wash cycle is indicated by beeps and by the flashing of the indicator light of the selected wash cycle. Open the door, switch off the appliance by pressing the ON/OFF If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. Button, shut off the water tap and unplug the appliance from the electricity socket. Wait a few minutes before removing the crockery in order to For good washing results also follow the instructions shown on the detergent box. For further questions please ask the detergent producers' Advice Offices. - The machine will switch off automatically during long periods of inactivity in order to minimise To open the detergent dispenser use the opening device "A". If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. Changing a wash cycle in progress If a mistake was made in the wash cycle selection process, it is possible to change the cycle provided that it has only just begun: open the door, taking care to avoid the escaping steam, and press and hold the ON/OFF button; the machine will switch off. Switch the machine back on using the ON/OFF button and select the new wash cycle and any options desired; start the cycle by closing the door. Adding extra crockery Without switching off the machine, open the door, taking care to avoid the escaping steam, and place the crockery inside the dishwasher. Close the door: the cycle starts from the point at which it was interrupted. Accidental interruptions If the door is opened during the wash cycle or there is a power cut, the cycle stops. It starts again from the point at which it was interrupted once the door has been shut or the electricity supply restored. Place the amount of detergent for pre-washing directly inside the tub. When measuring out the detergent refer to the Table of wash cycles to add the proper quantity. Compartment B comprises a level showing the maximum quantity of liquid or powder detergent that can be added to each cycle. [. . . ] After several washes, check the filter assembly and if necessary Clean it thoroughly under running water, using a non-metallic Any marks on the inside of the appliance may be removed using a cloth dampened with water and a little vinegar. Turn the cylindrical filter C in an anti-clockwise direction and pull it out (fig. Always keep the door of the appliance ajar in order to avoid Moisture from forming and being trapped inside the machine. Remove the cup filter B by exerting a slight pressure on the side flaps (fig. [. . . ]