User manual ICOM IC-T8EA BROCHURE

[. . . ] NEVER short the terminals of the battery pack. EXPLICIT DEFINITIONS DEFINITION Personal injury, fire hazard or electric shock RWARNING may occur. AVOID using or placing the transceiver in direct sunlight or in areas with temperatures below ­25°C or above +55°C. The basic operations, transmission and reception of the transceiver are guaranteed within the specified operating temperature range. However, the LCD display may not be operate correctly, or show an indication in the case of long hours of operation, or after being placed in extremely cold areas. Icom, Icom Inc. [. . . ] r Set the desired digit using [UP], [DOWN], [TX Code CH Up] or [TX Code CH Down] or 10-keypad*. *Depending on version. w Push [TX Code CH Select] for 1 sec. r Set the desired digit using [UP], [DOWN], [TX Code CH Up], [TX Code CH Down] or 10-keypad. * *Depending on version. t Push [TX Code Enter] to set the digit. The editable digit will move to the right automatically. · When the 10-keypad is used to set, the editable digit will move to the right automatically without pushing [TX Code CH Select]. y Repeat r and t to input all allowable digits. u Push [Call] or [PTT] to transmit the edited TX code. t Push [TX Code CH Select] to set the digit. The editable digit will move to the right automatically. · When the 10-keypad is used to set, the editable digit will move to the right automatically without pushing [TX Code CH Select]. y Repeat r and t to input all allowable digits. u Push [Call] or [PTT] to transmit the edited TX code. 14 BASIC OPERATION D DTMF transmission If the transceiver has [DTMF Autodial] assigned to it, the automatic DTMF transmission function is available. e Push [DTMF Autodial] to transmit the DTMF code in the selected DTMF channel. 3 I User set mode User set mode is accessed with [User Set Mode] and allows you to set seldom-changed settings. In this case you can "customize" the transceiver operation to suit your preferences and operating style. Entering the user set mode: q Push and hold [User Set Mode] to enter user set mode. Then push [UP] or [DOWN] to set the desired level/condition. · Available set mode functions are Backlight, Beep, SQL Level, Mic Gain and Battery Voltage. w Push and hold [User Set Mode] to exit user set mode. I Scrambler function The voice scrambler function provides private communication between stations. The frequency inversion type is equipped to all versions, moreover, the optional Rolling or Non-rolling type can be available. again to return to the standby condition. · When no operation is performed for 30 sec. , the transceiver returns to the standby condition automatically. 17 4 BIIS OPERATION I Transmitting a call Total of a 3 ways for code selection are available--selecting the call code from memory, entering the call code from the keypad and calling back from the queue channel record. D Calling back from the queue channel q While in the standby condition, push [P1] (Digital) for 1 sec. w Push [UP] or [DOWN] to select the desired record. D Using call memory q While in the standby condition, push [P1] (Digital) to enter the call code memory channel selection mode. ·" " appears. Appears e Push [P0] (Call) or [PTT]* to call. *PTT call can be made only when PTT call capability is permitted. Call code text is displayed. w Push [UP] or [DOWN] to select the desired call code. e Push [P0] (Call) or [PTT]* to call. *PTT call can be made only when PTT call capability is permitted. NOTE: When no answer back is received, the transceiver repeats the call 3 times (default) automatically, and " " is displayed during each call. However, an error beep sounds and " " is displayed when no answer back is received after the calls. t Push [MONITOR] (Moni(Audi)) to send the `Clear down' signal. NOTE: When no answer back is received, the transceiver repeats the call 3 times (default) automatically, and " " is displayed during each call. However, an error beep sounds and " " is displayed when no answer back is received after the calls. 18 BIIS OPERATION 4 D Direct code entry q While in the standby condition, push [P3] (TX Code Enter) to enter the TX code edit mode. · Editable code digit blinks. u Push [PTT] to transmit; release to receive. For your information When the "UpDate" setting for the call code is enabled, the set code is overwritten into the call code memory. w Push [P3] (TX Code Enter) to select the desired digit to be edited. · Editable digit differs according to the setting. e Set the desired digit using [CH Up]/[CH Down]/[TX Code CH Up]/[TX Code CH Down] or 10-keypad. * *Depending on version r Push [P3] (TX Code Enter) to set the digit, then the editable digit will move to the right automatically. · When the 10-keypad is used to set, the editable digit will move to the right automatically without pushing [P3] (TX Code Enter). t Repeat e and r to input all allowable digits. y Push [P0] (Call) or [PTT]* to call. *PTT call can be made only when PTT call capability is permitted. NOTE: When no answer back is received, the transceiver repeats the call 3 times (default) automatically, and " " is displayed during each call. However, an error beep sounds and " " is displayed when no answer back is received after the calls. [. . . ] 2) w Slide the base clip in the direction of the arrow until the base clip is locked and makes a `click' sound. r Once the transceiver is locked in place, it swivels as illustrated below. 37 8 SWIVEL BELT CLIP I To detach q Turn the transceiver upside down in the direction of the arrow and pull out from the belt clip. 2) e Pinch the clip (q), and slide the base clip in the direction of the arrow (w). q w CAUTION! HOLD THE TRANSCEIVER TIGHTLY, WHEN HANGING OR DETACHING THE TRANSCEIVER FROM THE BELT CLIP. Otherwise the transceiver may not be attached to the holder or swivel properly if the transceiver is accidentally dropped and the base clip is scratched or damaged. 38 OPTIONS D BATTERY PACK Battery pack BP-230 BP-231 BP-232 Voltage 7. 4 V 7. 4 V 7. 4 V Capacity 800 mAh 1150 mAh 2000 mAh Battery life* 6 hrs. 8 hrs. 9 D BELT CLIPS · MB-93 SWIVEL BELT CLIP · MB-94 BELT CLIP Exclusive alligator-type belt clip. [. . . ]