User manual ICOM IC-F110S

[. . . ] i TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii 1 PANEL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1­5 I Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 I Function LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] BANK CH4 ¡ SCAN START/STOP KEY Push this key to start scanning; and push again SCAN A to stop. SCAN B ¡ LOCK KEY Push this key for 1 sec. to lock all programmable LOCK keys except the following: · [CALL] (incl. [CAL A] and [CAL B]), [MONI] and [EMER] keys. NOTE: Place the microphone on hook to start scanning. 3 PANEL DESCRIPTION ¡ MONITOR KEY Activates one of (or two of) the following functions MONI on each channel independently: · Push and hold the key to unmute the channel (audio is emitted; `Audible' condition). · Push the key to toggle the mute and unmute conditions (toggles `Audible' and `Inaudible'). · Push the key to mute the channel (sets to `Inaudible' only). · Push the key to unmute the channel (sets to `Audible' only). · Push the key after communication is finished to send a `reset code'. 1 ¡ TALK AROUND KEY Turns the talk around function ON and OFF. TA · The talk around function equalizes the transmit frequency to the receive frequency for mobile-tomobile communication. ¡ WIDE/NARROW KEY Push this key to toggle the bandwidth between W/N wide or narrow. ¡ DTMF AUTODIAL KEY Push this key to transmit a specified DTMF code. DTMF NOTE: The unmute condition (`Audible' condition) may automatically return to the mute condition (`Inaudible` condition) after a specified period depending on the pre-setting. ¡ OUTPUT POWER SELECTION KEYS Select the transmit output power temporarily, or H/L permanently, depending on the pre-setting. · Ask your Dealer or System Operator for the output power level for each selection. ¡ CALL KEY Transmit a 2-tone, 5-tone code. CALL · Call transmission is necessary before you call CAL A another station depending on your signaling system. CAL B · The [CAL A] and/or [CAL B] keys may be available when your system employs selective `Individual/Group' calls. Ask your Dealer which call is assigned to each key. 4 1 PANEL DESCRIPTION ¡ SCRAMBLER KEY · Push and hold to turn the voice scrambler funcSCRM tion ON. NOTE: · The optional UT-109 (#02) or UT-110 (#02) VOICE SCRAMBLER UNIT is required. ­ UT-109: Non-rolling type. 1020 (4 groups × 255) codes are available. ¡ EMERGENCY KEY Push and hold the key to transmit an emergency call. EMER · If you want to cancel the emergency call, push and hold (or push) the key again before transmitting the call. · Depending on the pre-setting, the emergency call is transmitted one time only, or repeatedly, until receiving a control code. ¡ Hook Scan Several functions are available for the hanger HOOK function when taking the microphone from its hanger (hanger-off) and/or returning it to the hanger (hanger-on). [. . . ] Please ask your dealer for details. 4 14 5 CE DECLARATION OF CONFORMITY We Icom Inc. Japan 1-1-32, Kamiminami, Hirano-ku Osaka 547-0003, Japan Declare on our sole responsibility that this equipment complies with the essential requirements of the Radio and Telecommunications Terminal Equipment Directive, 1999/5/EC, and that any applicable Essential Test Suite measurements have been performed. Kind of equipment: Type-designation: VHF TRANSCEIVER 0168 Düsseldorf 30th Sep. 2002 Place and date of issue iC-f110s 136 174 MHz 12. 5 kHz/ 25 kHz 136 174 MHz 12. 5 kHz/ 20 kHz Authorized representative name Version (where applicable): This compliance is based on conformity with the following harmonised standards, specifications or documents: i) EN 301 489-1 v1. 2. 1 (2000-8) ii) EN 301 489-5 v1. 2. 1 (2000-8) iii) EN 60950 August 1992, A11 1997 iv) EN 300 086-2 v1. 1. 1 (March 2001) v) EN 300 219 (March 2001) Signature CE Versions of the IC-F110S/210S which display the "CE" symbol on the serial number seal, comply with the essential requirements of the European Radio and Telecommunication Terminal Directive 1999/5/EC. This warning symbol indicates that this equipment operates in non-harmonised frequency bands and/or may be subject to licensing conditions in the country of use. [. . . ]