User manual HP VISUALIZE J2240 WORKSTATION

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP VISUALIZE J2240 WORKSTATION. We hope that this HP VISUALIZE J2240 WORKSTATION user guide will be useful to you.


HP VISUALIZE J2240 WORKSTATION : Download the complete user guide (3225 Ko)

You may also download the following manuals related to this product:

   HP visualize j2240 workstation annexe 1 (59 ko)
   HP VISUALIZE J2240 WORKSTATION BROWSABLE CD BOOKLET (95 ko)
   HP VISUALIZE J2240 WORKSTATION OVERVIEW OF THE VISUALIZE FX GRAPHICS (335 ko)
   HP VISUALIZE J2240 WORKSTATION PA-RISC VISUALIZE WORKSTATION UNIVERSAL SERIAL BUS (7396 ko)
   HP VISUALIZE J2240 WORKSTATION TROUBLESHOOTING GUIDE FOR SCR+DMI: 9000 COMPUTERS (80 ko)
   HP VISUALIZE J2240 WORKSTATION WORKSTATIONS - -UX 10.20 GRAPHICS ADMINISTRATION GUIDE (2603 ko)
   HP VISUALIZE J2240 WORKSTATION VISUALIZE WORKSTATION - NT & -UX FUNCTIONAL INTEROPERABILITY (41 ko)
   HP VISUALIZE J2240 WORKSTATION VISUALIZE J2240 WORKSTATION UPGRADE INSTRUCTIONS (A2876-90012) (998 ko)
   HP VISUALIZE J2240 WORKSTATION WORKSTATIONS - GRAPHICS ADMINISTRATION GUIDE FOR RED HAT LINUX 6.2 (1128 ko)
   HP VISUALIZE J2240 WORKSTATION VISUALIZE J280, J282, J2240 WORKSTATIONS SERVICE HANDBOOK (A2876-90041) (7015 ko)
   HP VISUALIZE J2240 WORKSTATION VISUALIZE WORKSTATION - MIGRATING UNIX TECHNICAL ENVIRONMENTS TO WINDOWS NT (54 ko)
   HP VISUALIZE J2240 WORKSTATION VISUALIZE WORKSTATION - INTEROPERABLE SECURITY FOR -UX AND WINDOWS NT TECHNICAL (127 ko)
   HP VISUALIZE J2240 WORKSTATION WORKSTATIONS J AND C CLASS - IMPORTANT PA8700 INSTALLATION INFORMATION (A9365-9 (69 ko)
   HP VISUALIZE J2240 WORKSTATION -UX DMI 2.0 DEVELOPER'S GUIDE: -UX/ 9000 COMPUTERS, -UX DESKTOP MANAGEMENT INTE (1044 ko)
   HP VISUALIZE J2240 WORKSTATION SYSTEM CONFIGURATION REPOSITORY USER'S REFERENCE: -UX/ 9000 COMPUTERS, EDITION (735 ko)

Manual abstract: user guide HP VISUALIZE J2240 WORKSTATION

Detailed instructions for use are in the User's Guide.

[. . . ] J282/2240 Owner's Guide R Workstation Systems Group HP Part No. A2876­90015 Edition E1297 Printed in U. S. A. © Hewlett-Packard Co. 1997 First Printing: December 1997 UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company Limited. NOTICE The information contained in this document is subject to change without notice. HEWLETT­PACKARD WARRANTY STATEMENT HP PRODUCT DURATION OF WARRANTY J282/J2240 one year 1. [. . . ] To change the jumper settings, use needlenose pliers to set the drive's SCSI ID to an address that is not used by another SCSI device. 4. Use needlenose pliers to remove the SCSI terminators, if still attached to the drive. If you need to change the Operation Mode switches, locate the switches on the underside of the DDS tape drive. Switches 1 and 2 are used to configure the data compression operation mode. Switches 3 through 8 are used to specify drive connectivity and functionality according to host or customer requirements. Figure NO TAG shows the available options. B-18 SCSI Terminators (must be removed) Target ID Term PWR ID2 Jumpers ID1 ID0 Target ID Term PWR ID2 Jumpers ID1 ID0 0 1 2 3 (Default) 4 5 6 Figure B­9. DDS-DC Tape Drive SCSI Address/Jumper Settings B-19 Bit 0 Bit1 Bit 2 Term PWR SCSI Connector SCSI ID Term PWR* Bit 2 SCSI ID Power Connector Term PWR* Bit 2 Bit 1 Bit 0 Bit 1 Bit 0 0 1 2 3 (Default) 4 5 6 *Term PWR is not used in HP workstation configurations. Figure B­10. DDS-2 Tape Drive and SCSI Address/Jumper Settings B-20 Operation Mode Switches ON 12345678 Compression Disabled, No Host Control ON 12345678 Compression Disabled, Host Can Control Compression ON 12345678 Compression Enabled, No Host Control ON 12345678 Compression Enabled, With Host Control Default Setting Figure B­11. Switch Settings for Data Compression Operation Mode B-21 Floppy Drive The floppy disk drive ships with the drive set to SCSI ID address 0. We recommend keeping the address setting at 0 unless it is used by another device. CAUTION: Floppy disk drives are susceptible to mechanical and electrostatic shock. When handling the drive, always wear the static-grounding wrist strap that came in the floppy disk drive kit. If you need to change the floppy disk drive's address, follow these instructions, referring to Figures B­12 and B­13. If you do not need to change the drive's address, go to Step 10 of this installation procedure. To change the jumpers, use needlenose pliers to set the drive's SCSI ID to an address that is not used by another SCSI device. The host SCSI controller uses SCSI ID 7. NOTICE: 3. Use needlenose pliers to remove the SCSI terminators, if still attached to the drive. B-22 Jumper in = 0; out = 1 ID 2 ID 1 ID 0 Top View of Floppy Disk Drive SCSI ID Address Jumpers SCSI ID Address Jumpers SCSI ID Address 0 1 2 3 4 5 6 7 Jumpers ID 2 ID 1 ID 0 Figure B­12. Floppy Drive SCSI Address/Jumper Settings Å Å B-23 1 2 3 Å Top View of Floppy Disk Drive SCSI Terminators 1 2 3 Figure B­13. Floppy Drive Terminators B-24 ÅÅ ÅÅ ÅÅ ÅÅ 13. Figure B­14 shows the orientation of each of the removable media drives in the bracket and the position of the screws holding the drive bracket in place. The same bracket can be used on all three drives. Floppy Drive CD-ROM Drive DDS Drive Figure B­14. Attaching Removable Drive Mounting Bracket and Drive Orientation B-25 14. With the disk mounting bracket between the guides on each side of the Storage Assembly, slide the disk into the Storage Assembly, securing it with the two side screws. Do not over-tighten the side screws. Reconnect the drive SCSI and power cables here. Figure B­15. Replacing Drive Screws 15. Reconnect the cabling from the back of the drive to the side of the drawer assembly. Secure the EMI plate at the back of the removable drives with the captive screw in the bottom of the plate. 17. Push the drawer ejector handle up until the Storage Assembly slides all the way into the system unit and secure the two captive screws on the left of the Storage Assembly, as shown in Figure B­16. NOTICE: If the ejector handle is not pushed completely in, you may not have proper seating of the SCSI PCB interconnect to the backplane. 1st Captive Screw (2nd Captive screw is below 1st, but not visible in this view) Drawer Ejector Handle Figure B­16. Replacing the Storage Drawer Assembly B-27 19. Follow the instructions in "Checking the SCSI IDs" earlier in this appendix, to verify that your workstation can see the newly installed drive. For information about using your drives see the following chapters in this book: · · · Using your CD-ROM drive is in Chapter 3. Using your floppy drive is in Chapter 5. B-28 Adding a Hard Drive This section describes how to add a hard drive to your workstation. [. . . ] See also HP Visual User Environment. title bar The rectangular area between the top of the window and the window frame, that contains the title of the window object. transceiver A device that transmits and receives signals. user account The system administrator defines a user account for every person authorized to use the system. Each user account contains the name the computer uses to identify the person (user ID), and the person's password. User accounts also contain project and organization names, to help the system determine who can use the system and what resources each person or organization can use. See also user ID, password. user ID The name the computer uses to identify you. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP VISUALIZE J2240 WORKSTATION




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP VISUALIZE J2240 WORKSTATION will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.