User manual HP VISUALIZE C200/C240 SSP WORKSTATION

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP VISUALIZE C200/C240 SSP WORKSTATION. We hope that this HP VISUALIZE C200/C240 SSP WORKSTATION user guide will be useful to you.


HP VISUALIZE C200/C240 SSP WORKSTATION : Download the complete user guide (1306 Ko)

You may also download the following manuals related to this product:

   HP visualize c200/c240 ssp workstation annexe 1 (1461 ko)
   HP visualize c200/c240 ssp workstation annexe 2 (59 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION BROWSABLE CD BOOKLET (95 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION IRIX TO -UX MIGRATION GUIDE (649 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION OVERVIEW OF THE VISUALIZE FX GRAPHICS (335 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION PA-RISC VISUALIZE WORKSTATION UNIVERSAL SERIAL BUS (7396 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION TROUBLESHOOTING GUIDE FOR SCR+DMI: 9000 COMPUTERS (80 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION WORKSTATIONS - -UX 10.20 GRAPHICS ADMINISTRATION GUIDE (2603 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION VISUALIZE B1000, C3000, J5000 WORKSTATION MEMORY SUBSYSTEM (122 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION VISUALIZE C CLASS HARDWARE INSTALLATION CARD (A4200-90012) (3111 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION VISUALIZE C160, C180, C200, C240, C360 - INSTALLATION CARD (3111 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION 6 DEGREES OF FREEDOM CAD INPUT DEVICES A43161C TECHNICAL DATA (193 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION VISUALIZE B1000, C3000, J5000 WORKSTATIONS SOFTWARE SOLUTION (58 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION VISUALIZE WORKSTATION - NT & -UX FUNCTIONAL INTEROPERABILITY (41 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION WORKSTATIONS - GRAPHICS ADMINISTRATION GUIDE FOR RED HAT LINUX 6.2 (1128 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION INSTALLING THE VISUALIZE C CLASS DISK TRAY FAN UPGRADE (A4200-90028) (431 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION VISUALIZE WORKSTATION - MIGRATING UNIX TECHNICAL ENVIRONMENTS TO WINDOWS NT (54 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION INSTALLING THE VISUALIZE WORKSTATION C200 TO C240 CPU UPGRADE (A4200-90035) (216 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION VISUALIZE C CLASS WORKSTATIONS - PA8700 UPGRADE INSTRUCTIONS(A9365-90000) NOTE: (1572 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION VISUALIZE C100, C110, C160L, C160, C180, C200, C240 WORKSTATIONS SERVICE HANDBO (1417 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION VISUALIZE C100, C110, C160L, C160, C180, C200, C240, C360 WORKSTATIONS SERVICE (1676 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION VISUALIZE WORKSTATION - INTEROPERABLE SECURITY FOR -UX AND WINDOWS NT TECHNICAL (127 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION WORKSTATIONS J AND C CLASS - IMPORTANT PA8700 INSTALLATION INFORMATION (A9365-9 (69 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION -UX DMI 2.0 DEVELOPER'S GUIDE: -UX/ 9000 COMPUTERS, -UX DESKTOP MANAGEMENT INTE (1044 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION INSTALLING THE VISUALIZE WORKSTATION C100, C110, C160, C180 TO C200 CPU UPGRADE (542 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION INSTALLING THE VISUALIZE WORKSTATION C200, C240 TO C360 CPU UPGRADE (A4200-9005 (240 ko)
   HP VISUALIZE C200/C240 SSP WORKSTATION SYSTEM CONFIGURATION REPOSITORY USER'S REFERENCE: -UX/ 9000 COMPUTERS, EDITION (735 ko)

Manual abstract: user guide HP VISUALIZE C200/C240 SSP WORKSTATION

Detailed instructions for use are in the User's Guide.

[. . . ] A4200-90033 Edition E0997 Printed in U. S. A. © Hewlett-Packard Co. 1997 Printing History First Printing: September 1997 UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company Limited. NOTICE The information contained in this document is subject to change without notice. HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material. [. . . ] NOTICE: Memory slots must be filled in order from 0A and 0B through 5A and 5B. 127 Changing Your Workstation's Hardware Configuration Installing Additional Memory 3 Close the ejector tabs on each side of the memory connector to lessen the force needed to seat the memory module. See Figure 41. White Ejector Tab Figure 41 Installing Memory Modules 4 5 Place the memory module in the connector, lining it up with the guides. Make sure to put the notched end toward the white ejector tab, as shown in Figure 41. Press firmly and evenly on the memory module to ensure that it seats properly. 128 Changing Your Workstation's Hardware Configuration Installing Additional Memory 6 Replace the main tray assembly as described in "Replacing the Main Tray Assembly, " earlier in this appendix. To verify that this installation was successful, follow the steps in Appendix D, "The Boot Console Interface, " on displaying memory information. If you have only replaced a faulty memory module, you must issue the pdt clear command in the service menu of the Boot Console Interface. (Y/N) >. " 129 Changing Your Workstation's Hardware Configuration Installing the EGRAM (Enhanced Graphics RAM) Module (C160/C180) Installing the EGRAM (Enhanced Graphics RAM) Module (C160/C180) Before installing the EGRAM module, perform the procedure in Removing the Main Tray Assembly on page 122. Perform the following steps to add the EGRAM module to your workstation: 1 Press the release clip and rotate the EISA fan, as shown in Figure 42. Figure 42 Rotating the EISA Fan 130 Changing Your Workstation's Hardware Configuration Installing the EGRAM (Enhanced Graphics RAM) Module (C160/C180) 2 3 Slide the EISA slider to the side to remove it, as shown in Figure 43. Remove the screw from the EISA retainer and remove it, as shown in Figure 43. EISA Slider EISA Retainer Figure 43 Removing the EISA Slider and Retainer 4 Grasp the option board by the edge with both hands and pull it straight out. Remove all option boards, making note of which option slot each one was installed in. NOTICE All boards must be replaced in their original slots or your system may not run properly. 131 Changing Your Workstation's Hardware Configuration Installing the EGRAM (Enhanced Graphics RAM) Module (C160/C180) 5 6 Install the standoffs into the EGRAM module, as shown in Figure 44. Push the standoffs into the holes on the module until the clips fully emgage with the board. Align the connector on the EGRAM module with the connector on the I/O board, while aligning the standoffs with the holes in the I/O board. See Figure 44. Figure 44 Installing the EGRAM Module 7 Connect the EGRAM module to the I/O board. Push down firmly on the connector area to make sure it is fully seated. Push firmly near the standoffs to make sure that they are fully engaged with the I/O board. 132 Changing Your Workstation's Hardware Configuration Installing the EGRAM (Enhanced Graphics RAM) Module (C160/C180) 8 Make sure that the EISA fan is fully rotated, as shown in Figure 45. Figure 45 Rotating the EISA Fan 9 Slide the option boards into the slots that they came out of, as shown in Figure 46. Make sure that the hole in each board's handle aligns with the pin on the back panel. Figure 46 Installing an Option Board 133 Changing Your Workstation's Hardware Configuration Installing the EGRAM (Enhanced Graphics RAM) Module (C160/C180) 10 Press in firmly on both ends of the option board at the same time to make sure that it is firmly seated in the backplane connector. 12 Replace the EISA slider, as shown in Figure 47. Figure 47 Installing the EISA Retainer and EISA Slider 134 Changing Your Workstation's Hardware Configuration Installing the EGRAM (Enhanced Graphics RAM) Module (C160/C180) 13 Rotate the fan back into place, as shown in Figure 48. Push it into the rear panel firmly until the clip snaps into place. Figure 48 Securing the Fan 14 Replace the main tray assembly as described in Replacing the Main Tray Assembly on page 124. 135 Changing Your Workstation's Hardware Configuration Installing an EISA, PCI, or GSC Option Board Installing an EISA, PCI, or GSC Option Board Your workstation has 4 option slots, as shown in Figure 49. On C160/C180 workstations, slots 1 and 2 each support either GSC or EISA boards. Slot 4 supports a GSC or PCI board. On C200 workstations, slots 1, 2, 3 and 4 each support either GSC or PCI boards. Slot 1 supports a GSC, EISA, or PCI board. Slot 4 Slot 2 Slot 3 Slot 1 Figure 49 Option Slots from Outside the System Unit 136 Changing Your Workstation's Hardware Configuration Installing an EISA, PCI, or GSC Option Board Graphics Adapter Considerations If you are installing a graphics option, read the information in this section first. Special Video Configuration Statements The following statements apply only to those applications which include a cable connected to the S-Video connector on the A4248A card. No modification to the regulatory statements is necessary for applications which include cables connected to other connectors on the card but not to the SVideo connector. For EN55022 or CISPR 22 Applications: WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. [. . . ] subdirectory A directory that is located in, or anywhere on a path below, another directory. superuser A user with permission to enter the top-level directory and make changes to files and programs that users are not allowed to change. To "become superuser" or "become root" means to let the system know that you are now assuming the role of system administrator. You can do this either by logging into the system as root, or by typing su at a command-line prompt. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP VISUALIZE C200/C240 SSP WORKSTATION




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP VISUALIZE C200/C240 SSP WORKSTATION will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.