User manual HP EP9012 SETUP

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP EP9012. We hope that this HP EP9012 user guide will be useful to you.


HP EP9012 SETUP: Download the complete user guide (329 Ko)

You may also download the following manuals related to this product:

   HP EP9012 (4625 ko)
   HP EP9012 (1633 ko)
   HP EP9012 (4772 ko)
   HP EP9012 (2231 ko)
   HP EP9012 (3752 ko)
   HP EP9012 ſ (2767 ko)
   HP EP9012 BEKNOPTE INSTALLATIEGIDS (2767 ko)
   HP EP9012 EP9010 INSTANT CINEMA ˔ (1614 ko)
   HP EP9012 מדריך התקנה מהירה (2767 ko)

Manual abstract: user guide HP EP9012SETUP

Detailed instructions for use are in the User's Guide.

[. . . ] Reproduction, adaptation, or translation without prior written permission is prohibited except as allowed under the copyright laws. Consumer transactions in Australia and the United Kingdom: The above disclaimers and limitations shall not apply to consumer transactions in Australia and the United Kingdom and shall not affect the statutory rights of consumers. Hewlett-Packard Company Digital Projection and Imaging 1000 NE Circle Blvd. Corvallis, OR 97330 First Edition July 2004 Contents 1 Setting up Safety precautions. 33 User's Guide 3 Contents Adjusting a slanted picture . [. . . ] For a ceiling installation, wear goggles and gloves when removing the lamp module. If the lamp is broken, contact HP about repairs that might be required due to glass fragments. If the lamp breaks, adequately ventilate the area where the breakage occurred. Disposal of this lamp might be regulated due to environmental considerations. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at http://www. eiae. org. Because the lamp assembly operates at a very high temperature, wait 30 minutes before removing the lamp module. 1. Loosen the 3 screws 1 on the front cover and pull out the front cover until the tab 2 at the right end comes out of the projector 3. Loosen the two screws 4 on the lamp module, and pull out the module 5. 44 User's Guide Maintaining the projector 5. Insert the new lamp module into the projector and tighten the two screws. Insert the tab on the front cover into the slot in the projector and close the cover. If the lamp does not turn on after the warm-up period, try reinstalling the lamp. Description Queries the current active input source: 0=no active source, 3=composite video, 4=S-video, 5=component video, 8=DVI. Attempts to use the specified source as the active input source, or queries the last source requested: 3=composite video, 4=S-video, 5=component video, 8=DVI. Switches to the next input source. SRC RSRC 3, 4, 5, 8, ? NXT None 50 User's Guide Installing permanently Video functions Command Parameters 0 to 2, ?Description Sets or queries the active color space: 0=RGB, 1=YPbPr, 2=YCbCr. Sets or queries the picture mode: 0=computer, 1=movie, 3=sports, 4=TV, 5=custom. Sets or queries the vertical shift of the projected image: usable range is determined by the active input source. Sets or queries the horizontal shift of the projected image: usable range is determined by the active input source. Sets or queries the color saturation. CSPC PMOD VSHF value, +, -, ? HSHF value, +, -, ? BRT CON SAT TNT CTMP SHRP PENH KEYV 0 to 100, +, -, ?Sets or queries the picture enhancement setting. -50 to 50, +, -, ?Sets or queries the vertical keystone: 0=no keystone adjustment, 1 to 50=shrinks the top of the display, -1 to -50=shrinks the bottom of the display. None Sets or queries the aspect ratio: 0=1-to-1, 1=Best Fit, 4=Reduced. [. . . ] Disposal of the lamp might be regulated due to environmental considerations. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at http://www. eiae. org. Regulatory information This section presents information that shows how your digital projector complies with regulations in certain regions. Any modifications to your digital projector not expressly approved by HP could void the authority to operate the digital projector in these regions. U. S. A. This digital projector has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP EP9012




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP EP9012 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.