User manual HP COMPAQ Q2159

[. . . ] User's Guide Q1859 Q2009 Q2159 The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. HP assumes no responsibility for the use or reliability of its software on equipment that is not furnished by HP. [. . . ] NOTE: The Power button is located on the top right side of the monitor. 2 3 4 5 Auto/OK /+ /­ Menu Auto-adjusts the display to the ideal setting when the OSD is not active. / Navigates forward through the OSD menu and increases adjustment levels. / Navigates backward through the OSD menu and decreases adjustment levels. Opens, selects, or exits the OSD menu. User's Guide 4-3 Operating the Monitor Using the On-Screen Display (OSD) An on-screen display is an image superimposed on a screen picture, commonly used by monitors, televisions, VCRs, and DVD players to display information such as volume, channel, and time. If the monitor is not already on, press the Power button to turn on the monitor. To navigate through the Main or sub-menu, press the + (Plus) button on the monitor's side panel to scroll up, or the ­ (Minus) button to scroll in reverse. The menu moves to the top if you scroll down at the bottom of the selections. The menu moves to the bottom if you scroll up at the top of the selections. If you don't want to save the setting, select Cancel from the sub-menu or Exit from the Main Menu. NOTE: When a menu is displayed, if the buttons are untouched for 30 seconds (factory default), adjustments and settings are saved and the menu closes. OSD Menu Selections The following table lists the on-screen display (OSD) menu selections and their functional descriptions. After changing an OSD menu item, and if the menu screen has these options, you may choose to: Cancel -- to return to the previous menu level. Save and Return -- to save all changes and return to the OSD Main Menu screen. Reset -- to change back to the previous setting. Main Menu Options Brightness Contrast Image Control Auto Adjustment Horizontal Position Vertical Position Clock Icon Sub-menu Options Description Adjusts the brightness level of the screen. Minimizes any vertical bars or strips visible on the screen background. Adjusting the Clock will also change the horizontal screen image (VGA input only). This adjustment allows you to remove any horizontal noise, and clear or sharpen the image of characters (VGA input only). Clock Phase 4-4 User's Guide Operating the Monitor Icon Main Menu Options Color Sub-menu Options Description (continued) Selects the screen color. The factory default is 6500 K or Custom Color, depending on the model. 9300 K 6500 K Quick View Changes to slightly blueish white. Movie Photo Gaming Text Custom Settings saved when user adjusts the Brightness, Contrast, or Color in one of the Quick View options. Custom Color Selects and adjusts your own color scales: R -- Sets your own red color levels. B -- Sets your own blue color levels. sRGB Language Management Volume OSD Control Sets your screen colors to adapt to the color standards used in the image technology industry. Horizontal OSD Position -- Changes the viewing position of the OSD menu to the left or right area of the screen. Vertical OSD Position -- Changes the viewing position of the OSD menu to the top or bottom area of the screen. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the user's authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC rules and regulations. Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. [. . . ]