User manual HISENSE RB400N4EG2

[. . . ] CE notice This product has been determined to be in compliance with the Low Voltage Directive(2006/95/EC), the Electromagnetic Compatibility Directive(2004/108/EC)and the Eco-Design Directive(2009/125/EC) implemented by Regulation(EC) No 643/2009 of the European Union Thank you for your choosing our products. Before you use the appliance, we recommend that you read through these instructions carefully, which provides details about its usage and functions. Please ensure that all people using this appliance are familiar with its operations and safety features. It is important that you install the appliance correctly and pay attention to the safety instructions carefully. [. . . ] Just remount to the step 9, change partto left and partto right and then fix them with screws . Change screw hole covers on middle cover plate from left to right (as shown in figure below). Move the lower door and adjust its position to align lower hole site and upper hinge axis. Turn the middle hinge by 180, change the washer on the axis to the upper side, adjust the middle hinge to the appropriate position and then install it. Screw out The upper hinge axis, turn the upper hinge over and fix axis on it. Reverse part by 180°and install it onto the right corner of upper door then mount part. (both of which are taken down in step 2) Exchange wires both in the left and Move the upper door to appropriate position, adjust part and upper door, Move the connecting wire in the slot of upper door from right to left and then fix partand wire by screws. Take the reed switch out of the coping block(part 6 in step 3)and mount it on another block for use (which is with mark "R" in the plastic bag). Connect electrical connector in accordance with step 3 and then install part (which is in the plastic bag). View 1 of the appliance RD-43WC4SBA/CSA2 Note: Due to unceasing modification of our products, your refrigerator may be slightly different from this instruction manual, but its functions and using methods remain the same. To get more space in the freezer, you can remove drawers (except lower freezer drawer), installtion bracket and integrative ice maker/twistable ice tray. View 2 of the appliance RD-45WC4SBA/CSA2 Twin LED light Flexible wine rack Wine rack Folded shelf My fresh choice Moisture 0 cool Twist ice maker Integrative ice maker Upper freezer drawer Upper freezer glass shelf Middle freezer glass shelf Covered dairy rack Note: Due to unceasing modification of our products, your refrigerator may be slightly different from this instruction manual, but its functions and using methods remain the same. To save energy, please avoid keeping the door open for a long time when using the appliance. Temperature alarm If freezer temperature is too high due to power failure or other reasons, there will be a temperature alarm and the freezer temperature setting displays "-" or nothing. In case of temperature alarm, buzzer will sound constantly for 10 times and then stop automatically. In case of temperature alarm, press "Alarm" button for 3 seconds to check the highest freezer temperature. When power is restored, it is normal that the temperature alarm appears, this can be cleared by pressing "Alarm". Door rack It is suitable for the storage of eggs, canned liquid, bottled drinks and packed food, etc. Do not place too many heavy things in the racks The middle door shelf can be placed at different heights according to your requirements. Please take food out of the shelf Note: There are egg trays in the upper shelf and bottle holder in the lower shelf. Shelf in Refrigerator chamber There are shelves in refrigerator chamber, and they can be taken out to be cleaned. Note If you want to spread out the folded shelf, please press the outer verge of the flexible part first. [. . . ] If the LED light is damaged, contact the customer helpline for assistance. Hold the LED cover with one hand and pull it with the other hand while pressing the connector latch. If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out some easy checks before calling for service, please see below. You can carry out some easy checks according to this section before calling for service. [. . . ]